85275100

KNX radio blind actuator 1gang/binary input 2gang flush-mounted Electronics platform, light grey

Product data sheet

Technical Properties

Download

85275100 KNX radio blind actuator 1gang/binary input 2gang flush-mounted Electronics platform, light grey

KNX radio blind actuator 1gang/binary input 2gang flush-mounted Electronics platform, light grey
Art No.	85275100
EAN No.	4011334376125
P.U.	1 part
Price *	on demand
Price Group

Technical Characteristics

close all

Architecture

Bus system

KNX

Functions

Bus module detachable	no
ETS additional functions: +6 scenes, operating mode, 1 up/down button control, 2 x alarm, status display
ETS additional function: repeater function
reset function (to factory setting)
scene saving lockable
scene opening via KNX radio appliances
quicklink functions: blind, 2 scenes, forced control, up/down push-button

Configuration

with 2 mechanically and electrically mutually-locked relay contacts

Controls and indicators

with manual operation up/down
Activation, for example through switch, push-button, timer, blind timer switch
with configuration and function button

Connectivity

Bus system radio frequent	no
Bus system LON	no
Bus system Powernet	no
Radio protocol	KNX Radio
Receiver category	2
with 2 independent, mains supplied, binary inputs for potential-free contacts

Main electrical features

Frequency

50 Hz

Electric current

Input signal current

33 µA

Frequency

Radio reception frequency

868,3 MHz

Power

Radio transmission power

< 10 mW

Measurement

Input scanning voltage	per channel 5 V
Relative humidity (without condensation)	0…65 % (without condensation)

Materials

Colour independent of design lines

light grey

Dimensions

Dimensions (Ø x H)	53 x 27 mm
Diameter	53 mm
Height	27 mm

LED control

LED	with configuration and function LEDs, with control LED (relay closed)

Installation, mounting

Installation mode

for installation behind flush-mounted inserts

Connection

Conductor cross-section	0,75…2,5 mm²
Connection	with 2 independent battery-supplied binary inputs for potential-free contacts
with screw-in lift terminals
integration in the KNX radio/TP gateway, surface-mounted, into the KNX TP system

Cable

Binary cable length, extendable to	max. 5 m
Binary cable length	≈ 20 cm

Settings

Lamella adjustment on signal duration	< 1 s
toolless quicklink configuration using buttons and LED display

Equipment

Number of radio channels	2
Number of quicklink links	max. 20 transmitter/receiver
Self-retaining for 2 min on signal length	> 1 s
Transmitter duty cycle	1 %
Change-over time for change of direction	< 0,6 s

Standards

General standards

EN 50428, EN 60669-2-1, EN 300220-2, EN 301489-3, EN 50491-3

Use conditions

Operating temperature	0…45 °C
low intrinsic energy requirement

Identification

Application, usage	KNX radio - actuators
Product family	product family: output
Main design line	Electronics platform
Secondary design line(s)	Berker.Net

Product data sheet

Manuals & installation instructions

Manual for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (DE-EN-IT, 2012-05)

PDF, 171 KB

Catalogue - Pages

Order Overview for Berker.Net - Conventional electronics platform
Berker.Net - Conventional electronics platform

PDF, 2 MB

Catalogue - Chapters

Catalogue Chapter for Berker R.3
Berker R.3

PDF, 13,1 MB

KNX product database

	ETS Database for 85275100	VD5, 17,9 MB
	KNX Database (from ETS3) for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (V101)	VD5, 17,9 MB
	ETS Database for 85275100	KNXPROD, 15 MB
	KNX Database (from ETS4) for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (V101)	KNXPROD, 15 MB

Application guides ETS

	Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)	PDF, 1,8 MB
	Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)	PDF, 1,8 MB
	Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)	PDF, 1,8 MB
	Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)	PDF, 1,8 MB
	Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)	PDF, 1,8 MB
	Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)	PDF, 1,8 MB
	Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)	PDF, 1,8 MB
	Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)	PDF, 1,8 MB
	Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)	PDF, 1,8 MB
	Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)	PDF, 1,8 MB
	Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)	PDF, 1,8 MB
	Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)	PDF, 1,8 MB
	Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)	PDF, 1,8 MB
	Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)	PDF, 1,8 MB
	Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)	PDF, 1,8 MB
	Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)	PDF, 1,8 MB
More (10)