75414004

Technical Properties

Download

Accessories

• 

  

  

  • 
  • 
  • 

  Analogue input 4gang RMD KNX, light grey
  Art No.	75414004
  EAN No.	4011334272397
  P.U.	1 part
  Price *	on demand
  Price Group

  Technical Characteristics

  close all open all

  Architecture

  Fixing mode

  REG

  Controls and indicators

  with programming button and red programming LED

  Connectivity

  Bus system radio frequent	no
  Bus system LON	no
  Bus system Powernet	no
  Connector AST	with system interface for analogue input module
  Input signals	according to DIN IEC 381-1, -2
  input 4-20 mA will be controlled for wire break
  inputs parameterisable can be set individually
  cyclic transmission or transmission at absolute input modification adjustable

  Main electrical features

  Frequency

  50/60 Hz

  Voltage

  Auxiliary voltage	24 V AC
  Voltage, inputs	0-1; 0-10 V
  Operating voltage over bus	21…32 V DC

  Electric current

  Inputs, current

  0-20; 4-20 mA

  Power

  Current consumption	170 mA
  Total power loss under IN	6 W

  Resistance

  Input impedence, voltage	18 kΩ
  Input impedence, current	100 Ω

  Measurement

  Limit values

  per channel 2

  Detection

  Sensor output voltage	24 V DC
  Sensor output current	max. 100 mA
  for active sensors
  for wind, precipitation, brightness, temperature, twilight as well as humidity and temperature sensor, surface-mounted

  Materials

  Colour independent of design lines

  light grey

  Dimensions

  Depth	70 mm
  Assembling height as from DIN rail	63 mm
  Width of rail mounted device (RMD)	4 modules
  Height	90 mm
  Width	72 mm

  LED control

  LED	with green/red status LED (operation/fault)

  Connection

  with screw terminals

  bus connection via connecting terminal

  Settings

  Supported configuration modes

  system

  Scope of delivery

  Bus connection included

  yes

  Accessories included

  extendable with an analogue input module 4gang

  Equipment

  Product type:

  product type: analog input 4gang

  Safety

  Protection index IP	IP20
  Halogen free	no

  Use conditions

  Operating temperature

  -5…45 °C

  Identification

  Application, usage	KNX - sensors
  Product family	product family: input
  Main design line	KNX

  Instructions

  Separate 24 V DC auxiliary power supply needed!

  • Product data sheet 
• Manuals & installation instructions

  Manual for 75414004 - Analogue input 4gang RMD (DE-EN-NL-FR-NO-ES, 2005-05)

  PDF, 552 KB

  Catalogue - Pages

  Order Overview for Physical sensors Physical sensors

  PDF, 800 KB

  Catalogue - Chapters

  Catalogue Chapter for Berker KNX - system Berker KNX - system

  PDF, 7,7 MB

  KNX product database

  KNX Database (from ETS2) for 75414004 - Analogue input 4gang RMD (2007-09)

  VD2, 98 KB

  Application guides ETS

  	Application description ETS for 75414004 - Analogue input 4gang RMD (EN, 2006-01)	PDF, 220 KB
  	Application description ETS for 75414004 - Analogue input 4gang RMD (EN, 2006-01)	PDF, 220 KB
  	Application description ETS for 75414004 - Analogue input 4gang RMD (EN, 2006-01)	PDF, 220 KB
  	Application description ETS for 75414004 - Analogue input 4gang RMD (EN, 2006-01)	PDF, 220 KB
  	Application description ETS for 75414004 - Analogue input 4gang RMD (EN, 2006-01)	PDF, 220 KB
  	Application description ETS for 75414004 - Analogue input 4gang RMD (EN, 2006-01)	PDF, 220 KB
  	Application description ETS for 75414004 - Analogue input 4gang RMD (EN, 2006-01)	PDF, 220 KB
  	Application description ETS for 75414004 - Analogue input 4gang RMD (EN, 2006-01)	PDF, 220 KB
  	Application description ETS for 75414004 - Analogue input 4gang RMD (EN, 2006-01)	PDF, 220 KB
  	Application description ETS for 75414004 - Analogue input 4gang RMD (EN, 2006-01)	PDF, 220 KB
  	Application description ETS for 75414004 - Analogue input 4gang RMD (EN, 2006-01)	PDF, 220 KB
  	Application description ETS for 75414004 - Analogue input 4gang RMD (EN, 2006-01)	PDF, 220 KB
  	Application description ETS for 75414004 - Analogue input 4gang RMD (EN, 2006-01)	PDF, 220 KB
  	Application description ETS for 75414004 - Analogue input 4gang RMD (EN, 2006-01)	PDF, 220 KB
  	Application description ETS for 75414004 - Analogue input 4gang RMD (EN, 2006-01)	PDF, 220 KB
  	Application description ETS for 75414004 - Analogue input 4gang RMD (EN, 2006-01)	PDF, 220 KB
  More (10) 

  Product data sheets

  Product Data Sheet for 75414004 Analogue input 4gang RMD KNX, light grey

  PDF, 381 KB

• 	Art No.	Description	P.U.
  	75910001	Power supply 24 V AC RMD KNX, light grey	1 prt.

Customers who bought this item also bought (1)

75514001

Analogue actuator 4gang RMD with screw-in lift terminals, KNX, light grey