75311112

Universal dim actuator 1gang pro RMD 600 W KNX, light grey

Product data sheet

Technical Properties

Download

75311112 Universal dim actuator 1gang pro RMD 600 W KNX, light grey

Universal dim actuator 1gang pro RMD 600 W KNX, light grey
Art No.	75311112
EAN No.	4011334417316
P.U.	1 part
Price *	on demand
Price Group

Technical Characteristics

close all

Architecture

Bus system	yes
Fixing mode	REG

Functions

Bus module detachable	no
suitable to switch different external conductors
Learning function for optimised operation of compact fluorescent lamps and LED luminaires can be activated via the bus
bulb-preserving soft startup

Controls and indicators

With LED indication	yes
Indicator lamp	yes
manual operation also possible without bus, e.g. on building site
Manual operation can be activated via selection switch, thereby deactivation of the KNX function
Manual operation per channel via button with integrated status LED, thereby lockout of KNX function
status LED integrated in the manual operation button
selection switch for manual/bus operation as well as load setting
with illuminated programming button

Connectivity

Bus system radio frequent	no
Bus system LON	no
Bus system Powernet	no

Main electrical features

Frequency	50/60 Hz
Rated current	4 mA

Voltage

Auxiliary voltage	230 V AC
Input voltage	230 V AC
Operating voltage over bus	21…32 V DC

Electric current

Bus current consumption (data transfer)

2,3 mA

Fuse

Fuse	short-circuit proof and overload proof (display using LEDs), overheating protection (display using LEDs)

Power

Incandescent bulb power	600 W
Total power loss under IN	320 mW
Power dissipation per coil	180 mW

Power supply

Supply voltage

230 V AC

Materials

Colour

light grey

Dimensions

Width of rail mounted device (RMD)

4 modules

Fluorescent bulbs control

Power lighting fluo lamps

60W

LED control

Max number of LED/CFL lamps	8
Power LED	60 W
LED	Status LED integrated in manual operation button, Overheating protection, display using LEDs, Overload protection, display via LED

Connection

Connection cross-sect. flexible conductor	0,75 / 2,5mm²
Connection cross-sect. rigid cable	0,75 / 2.5mm²
Type of load	universal
Conductor cross-section (flexible)	0,75…2,5 mm²
Conductor cross-section (rigid)	0,75…2,5 mm²
Type of connection	quick connect
with integral bus coupling unit
with QuickConnect plug-in terminals
bus connection via connecting terminal

Settings

Supported configuration modes	system
parameter definable behaviour in the event of bus voltage failure/return

Scope of delivery

Bus connection included

yes

Equipment

Type of dimmer	dimming actuator
Modular expandability	no
With slide for manual switch	yes
phase cut-on or cut-off according to load type, self-learning
minimum/maximum dimming values per channel settable on device
very low noise