-
KNX radio blind actuator 1gang/binary input 2gang flush-mounted Electronics platform, ligth grey Art No. 85275120 EAN No. 4011334418610 P.U. 1 part Price * on demand Price Group Bus system yes Number of blinds/shutters outputs 1 Bus module detachable no - ETS additional functions: +6 scenes, operating mode, 1 up/down button control, 2 x alarm, status display
- ETS additional function: repeater function
- reset function (to factory setting)
- scene saving lockable
- scene opening via KNX radio appliances
- quicklink functions: blind, 2 scenes, forced control, up/down push-button
- with 2 mechanically and electrically mutually-locked relay contacts
Indicator lamp yes - with manual operation up/down
- Activation, for example through switch, push-button, timer, blind timer switch
- with configuration and function button
Bus system radio frequent yes Bus system LON no Bus system Powernet no Radio protocol KNX Radio Receiver category 2 - with 2 independent, mains supplied, binary inputs for potential-free contacts
Type of supply voltage AC Frequency 50 Hz System supply voltage 230V AC Number of entry circuits 2 Maximum switching current 3 A Radio reception frequency 868,3 MHz Contact rating with 230 V in AC1 690 W Total power loss under IN 450 mW Power dissipation per coil 150 mW Radio transmission power < 10 mW Relative humidity (without condensation) 0…65 % (without condensation) Dimensions (Ø x H) 53 x 27 mm Diameter 53 mm Height 27 mm LED with configuration and function LEDs, with control LED (relay closed) Installation mode for installation behind flush-mounted inserts Connection cross-sect. flexible conductor 0,5 / 1,5mm² Connection cross-sect. rigid cable 0,5 / 1,5mm² Conductor cross-section 0,75…2,5 mm² Number of contacts 1 Connection with 2 independent battery-supplied binary inputs for potential-free contacts Type of connection with screw - with screw-in lift terminals
- integration in the KNX radio/TP gateway, surface-mounted, into the KNX TP system
Binary cable length, extendable to max. 5 m Supported configuration modes system, easy, PB Lamella adjustment on signal duration < 1 s - toolless quicklink configuration using buttons and LED display
Number of radio channels 2 Number of quicklink links max. 20 transmitter/receiver Self-retaining for 2 min on signal length > 1 s Transmitter duty cycle 1 % Change-over time for change of direction < 0,6 s With slide for manual switch yes Operating temperature -10…50 °C Storage/transport temperature -20…70 °C - low intrinsic energy requirement
Application, usage KNX radio - actuators Product family product family: output Device family TRM Main design line Electronics platform Secondary design line(s) Berker.Net -
-
Order Overview for Actuators flush-mounted/surface-mounted
Actuators flush-mounted/surface-mountedPDF, 464 KB 
Catalogue Chapter for Berker KNX - system
Berker KNX - systemPDF, 7,7 MB 
ETS Database for 85275120
KNXPROD, 547 KB
Product Data Sheet for 85275120
KNX radio blind actuator 1gang/binary input 2gang flush-mounted Electronics platform, ligth greyPDF, 391 KB
Customers who bought this item also bought (4)
* All data is subject to errors and technical modifications. All price values are recommended retail price values, exclusive of VAT.