75342012

Technical Properties

Download

• 

  

  • 
  • 

  Switch actuator/blind actuator 2/1gang pro RMD flush-mounted 6 A with screw terminals, KNX, ligth grey
  Art No.	75342012
  EAN No.	4011334403807
  P.U.	1 part
  Price *	on demand
  Price Group

  Technical Characteristics

  close all open all

  Architecture

  Bus system	yes
  Fixing mode	flush-mounting

  Functions

  for 1 phase operation

  with positioning function for blind and lamella position

  with safety functions e.g. for wind, rain, alarm

  with sun shade function

  Controls and indicators

  Indicator lamp	yes
  manual operation in test mode via programming button (single-area operation)
  test mode/building site mode can be activated via programming button
  for activation of a drive for alternating current
  with illuminated programming button

  Connectivity

  Bus system radio frequent	no
  Bus system LON	no
  Bus system Powernet	no

  Main electrical features

  Rated operational voltage Ue	230 V
  Rated current	6 A

  Voltage

  Max. switching capacity at	230 V AC
  Operating voltage over bus	21…32 V DC
  System supply voltage	30V DC via bus

  Electric current

  Bus current consumption (data transfer)	7 mA
  Bus current consumption (idle)	5 mA
  Maximum through current	6 A
  Rated current	6 A
  Switching current at cos φ = 0.8	max. 6 A
  Withstand current in AC1 for the contact path or zone 1	6 A

  Power

  Max. power with electronic transfo.	500 W
  Total power loss under IN	0,5 W
  Output power	500 W
  Conventional transformers	500 VA
  Electronic transformers	500 W
  C-load	no

  Materials

  Colour

  light grey

  Dimensions

  Height of installed product	44 mm
  Dimensions (LLxwwxhh)	44 x 43 x 22 mm
  Height	44 mm

  Lighting control

  Fluorescent lamps with electronical ballast (EB)	6 x 48 W
  - uncompensated	500 VA

  Fluorescent bulbs control

  Power lighting fluo lamps	5 x 13W
  Max. power fluo. duo lamp comp. series	6 x 48W

  LED control

  Max number of LED/CFL lamps	5
  230V LED lamps	5 x 13 W
  Power LED	65 W

  Incandescent bulbs control

  Max. power with incandescent lamps	500 W
  230 V incandescent lamps and halogen lamps	500 W

  Connection

  Connection cross-sect. flexible conductor	0,75 / 2,5mm²
  Connection cross-sect. rigid cable	0,75 / 2.5mm²
  Conductor cross-section (flexible)	0,75…2,5 mm²
  Conductor cross-section (rigid)	0,75…2,5 mm²
  Number of contacts	2
  Type of contacts	1NO
  Type of connection	with screw
  with integral bus coupling unit
  with screw terminals
  bus connection via pre-assembled cable with bus connection terminal

  Settings

  Supported configuration modes	system
  switching time on change of direction adjustable

  Scope of delivery

  Bus connection included

  yes

  Equipment

  Modular expandability	no
  Different phases connectable	no
  With slide for manual switch	yes

  Use

  Differentiation characteristic 3 - Sales

  with screw terminals

  Safety

  Protection index IP

  IP20

  Use conditions

  Operating temperature	-5…45 °C
  Storage/transport temperature	-20…70 °C

  Identification

  Device family	TYB
  Main design line	KNX

  • Product data sheet 
• Manuals & installation instructions

  Instruction manuals for 75342012

  PDF

  Catalogue - Pages

  Order Overview for Actuators flush-mounted/surface-mounted Actuators flush-mounted/surface-mounted

  PDF, 464 KB

  Catalogue - Chapters

  Catalogue Chapter for Berker KNX - system Berker KNX - system

  PDF, 7,7 MB

  KNX product database

  ETS Database for 75342012

  KNXPROD, 298 KB

  Product data sheets

  Product Data Sheet for 75342012 Switch actuator/blind actuator 2/1gang pro RMD flush-mounted 6 A with screw terminals, KNX, ligth grey

  PDF, 264 KB

Customers who bought this item also bought (4)

75341003

Universal dim actuator flush-mounted KNX, light grey

85475120

KNX radio universal dim actuator 1gang/binary input 2gang flush-mounted Electronics platform

80906403

KNX

75341005

Heating actuator 230 V flush-mounted with integral bus coupling unit, KNX, light grey