-
Switch actuator 1gang pro flush-mounted 10 A with screw-in lift terminals, KNX, light grey Art No. 75341011 EAN No. 4011334403777 P.U. 1 part Price * on demand Price Group Bus system KNX Fixing mode flush-mounting Technical version 1gang - for 1 phase operation
- for switching e.g. 1 load
Indicator lamp yes - with manual operation on/off
- with illuminated programming button/button for manual operation
Bus system radio frequent no Bus system LON no Bus system Powernet no Rated operational voltage Ue 230 V Frequency 50/60 Hz Rated current 10 A Max. switching capacity at 230 V AC Operating voltage over bus 21…32 V DC System supply voltage 30V DC via bus Bus current consumption (data transfer) ≈ 7 mA Bus current consumption (idle) 5 mA Maximum through current 10 A Rated current 10 A Switching current at cos φ = 0.8 max. 10 A Withstand current in AC1 for the contact path or zone 1 10 A Max. power with electronic transfo. 600 W Total power loss under IN 0,6 W Output power 600 W Max. switching power 600 W Conventional transformers 600 VA Electronic transformers 600 W Colour light grey Height of installed product 44 mm Dimensions (LLxwwxhh) 44x43x22 mm Height 44 mm Fluorescent lamps with electronical ballast (EB) 6 x 58 W - uncompensated 600 W Quantity energy-saving lamps max. 5 Energy-saving lamps 5 x 15 W Power lighting fluo lamps 5 x 15W Max. power fluo. duo lamp comp. series 6 x 58W Quantity LED lamps max. 5 230V LED lamps 5 x 15 W Power LED 75 W LED with red programming LED, with status LED Max. power with incandescent lamps 600 W 230 V incandescent lamps 600 W 230 V halogen lamps 600 W 230 V incandescent lamps and halogen lamps 600 W Connection cross-sect. flexible conductor 0,5 / 2,5mm² Connection cross-sect. rigid cable 0,5 / 2,5mm² Conductor cross-section (flexible) 0,5…2,5 mm² Conductor cross-section (rigid) 0,5…2,5 mm² Number of contacts 1 Type of contacts 2NO Type of connection with screw - with integral bus coupling unit
- with screw terminals
- bus connection via pre-assembled cable with bus connection terminal
Supported configuration modes system Bus connection included yes - installation in flush-mounted or splash-protected junction box
Modular expandability no With slide for manual switch yes - with potential-free NO contact as well as NC contact parameterisable
Differentiation characteristic 3 - Sales with screw-in lift terminals Protection index IP IP20 Operating temperature -5…45 °C Storage/transport temperature -20…70 °C Device family TYB Main design line KNX -
-
Instruction manuals for 75341011
PDF
Order Overview for Actuators flush-mounted/surface-mounted
Actuators flush-mounted/surface-mountedPDF, 464 KB 
Catalogue Chapter for Berker KNX - system
Berker KNX - systemPDF, 7,7 MB 
ETS Database for 75341011
KNXPROD, 152 KB
Product Data Sheet for 75341011
Switch actuator 1gang pro flush-mounted 10 A with screw-in lift terminals, KNX, light greyPDF, 348 KB
* All data is subject to errors and technical modifications. All price values are recommended retail price values, exclusive of VAT.