-
Universal dim actuator 3gang easy RMD KNX, light grey Art No. 80313007 EAN No. 4011334416616 P.U. 1 part Price * on demand Price Group Bus system KNX Fixing mode REG Parallel-service possible no Operating mode load coupling of 3 channels to increase output power using parallel connection of the outputs - suitable to switch different external conductors
- Learning function for optimised operation of compact fluorescent lamps and LED luminaires can be activated via the bus
- bulb-preserving soft startup
Indicator lamp yes - manual operation also possible without bus, e.g. on building site
- Manual operation can be activated via selection switch, thereby deactivation of the KNX function
- Manual operation per channel via button with integrated status LED, thereby lockout of KNX function
- status LED integrated in the manual operation button
- selection switch for manual/bus operation as well as load setting
- with illuminated programming button
Bus system radio frequent no Bus system LON no Bus system Powernet no Frequency 50/60 Hz Rated current 4 mA Auxiliary voltage 230 V AC Input voltage 230 V AC Operating voltage over bus 21…32 V DC System supply voltage 30V DC via bus Bus current consumption (data transfer) 2,3 mA Fuse short-circuit and overload proof (electronic fuse), short-circuit proof and overload proof (display using LEDs), overheating protection (display using LEDs) Incandescent bulb power 900 W Total power loss under IN 770 mW Power dissipation per coil 430 mW Power of the variator 900 W Colour light grey Width of rail mounted device (RMD) 6 modules Quantity energy-saving lamps per channel max. 8 Power lighting fluo lamps 210W Quantity of dimmable, 230 V retrofit LED lamps per channel max. 8 Max number of LED/CFL lamps 12 Power LED 210 W LED Status LED integrated in manual operation button, Overheating protection, display using LEDs, Overload protection, display via LED 230 V incandescent lamps and halogen lamps per channel 300 W Connection cross-sect. flexible conductor 0,75 / 2,5mm² Connection cross-sect. rigid cable 0,75 / 2.5mm² Type of load universal Conductor cross-section (flexible) 0,75…2,5 mm² Conductor cross-section (rigid) 0,75…2,5 mm² Type of connection quick connect - with integral bus coupling unit
- with QuickConnect plug-in terminals
- bus connection via connecting terminal
Supported configuration modes easy, system - preset behaviour in the event of bus voltage failure/return
Bus connection included yes Number of outputs 3 Type of dimmer dimming actuator Substation input yes Power boost suitable no Modular expandability no With slide for manual switch yes - phase cut-on or cut-off according to load type, self-learning
- minimum/maximum dimming values per channel settable on device
- very low noise
Local operation/hand operation yes Protection index IP IP20 - with overheating, overload and short-circuit protection
Operating temperature -5…45 °C Storage/transport temperature -20…70 °C Main design line KNX -
-
Instruction manuals for 80313007
PDF
Order Overview for KNX actuators easy
KNX actuators easyPDF, 593 KB 
Catalogue Chapter for Berker KNX - easy
Berker KNX - easyPDF, 2,8 MB 
ETS Database for 80313007
KNXPROD, 292 KB
Product Data Sheet for 80313007
Universal dim actuator 3gang easy RMD KNX, light greyPDF, 650 KB -
Art No. Description P.U. 
80010000 KNX Configuration server easy link RMD KNX, light grey 1 prt. -
Art No. Description P.U.
80010000 KNX Configuration server easy link RMD KNX, light grey 1 prt.
* All data is subject to errors and technical modifications. All price values are recommended retail price values, exclusive of VAT.