Universal dim actuator 2gang easy RMD KNX, light grey
Product data sheet
Technical Properties
  • Universal dim actuator 2gang easy RMD KNX, light grey
    Art No. 80312113
    EAN No. 4011334420361
    P.U. 1 part
    Price * on demand
    Price Group
    Technical Characteristics
    Bus system yes
    Fixing mode REG
    Parallel-service possible no
    Operating mode load coupling of 2 channels to increase output power using parallel connection of the outputs
    • suitable to switch different external conductors
    • Learning function for optimised operation of compact fluorescent lamps and LED luminaires can be activated via the bus
    • bulb-preserving soft startup
    Indicator lamp yes
    • manual operation also possible without bus, e.g. on building site
    • Manual operation can be activated via selection switch, thereby deactivation of the KNX function
    • Manual operation per channel via button with integrated status LED, thereby lockout of KNX function
    • status LED integrated in the manual operation button
    • selection switch for manual/bus operation as well as load setting
    • with illuminated programming button
    Bus system radio frequent no
    Bus system LON no
    Bus system Powernet no
    Frequency 50/60 Hz
    Rated current 2600 mA
    Auxiliary voltage 230 V AC
    Input voltage 230 V AC
    Operating voltage over bus 21…32 V DC
    System supply voltage 30V DC via bus
    Bus current consumption (data transfer) 2,3 mA
    Fuse short-circuit and overload proof (electronic fuse), short-circuit proof and overload proof (display using LEDs), overheating protection (display using LEDs)
    Incandescent bulb power 5 / 300 W
    Total power loss under IN 0,35 W
    Power dissipation per coil 0,53 W
    Power of the variator 5 / 300 W
    Colour light grey
    Width of rail mounted device (RMD) 4 modules
    Quantity energy-saving lamps per channel max. 8
    Power lighting fluo lamps 60W
    Quantity of dimmable, 230 V retrofit LED lamps per channel max. 8
    Max number of LED/CFL lamps 8
    Power LED 60 W
    LED Status LED integrated in manual operation button, Overheating protection, display using LEDs, Overload protection, display via LED
    230 V incandescent lamps and halogen lamps per channel 300 W
    Connection cross-sect. flexible conductor 0,75 / 2,5mm²
    Connection cross-sect. rigid cable 0,75 / 2.5mm²
    Type of load universal
    Conductor cross-section (flexible) 0,75…2,5 mm²
    Conductor cross-section (rigid) 0,75…2,5 mm²
    Type of connection quick connect
    • with integral bus coupling unit
    • with QuickConnect plug-in terminals
    • bus connection via connecting terminal
    Supported configuration modes easy, system
    • preset behaviour in the event of bus voltage failure/return
    Bus connection included yes
    Number of outputs 2
    Type of dimmer dimming actuator
    Substation input no
    Power boost suitable no
    Modular expandability no
    With slide for manual switch yes
    • phase cut-on or cut-off according to load type, self-learning
    • minimum/maximum dimming values per channel settable on device
    • very low noise
    Local operation/hand operation yes
    Protection index IP IP20
    • with overheating, overload and short-circuit protection
    Operating temperature -5…45 °C
    Storage/transport temperature -20…70 °C
    Main design line KNX
  • Instruction manuals for 80312113
    KNX actuators easy Order Overview for KNX actuators easy
    KNX actuators easy
    PDF, 593 KB
    Berker KNX - easy Catalogue Chapter for Berker KNX - easy
    Berker KNX - easy
    PDF, 2,8 MB
    ETS Database for 80312113
    KNXPROD, 151 KB
    Universal dim actuator 2gang easy RMD KNX, light grey Product Data Sheet for 80312113
    Universal dim actuator 2gang easy RMD KNX, light grey
    PDF, 634 KB
* All data is subject to errors and technical modifications. All price values are recommended retail price values, exclusive of VAT.