85275100

KNX radio blind actuator 1gang/binary input 2gang flush-mounted Electronics platform, light grey
Product data sheet
Technical Properties
Download
  • KNX radio blind actuator 1gang/binary input 2gang flush-mounted Electronics platform, light grey
    Art No. 85275100
    EAN No. 4011334376125
    P.U. 1 part
    Price * on demand
    Price Group
    Technical Characteristics
    Bus system KNX
    Bus module detachable no
    • ETS additional functions: +6 scenes, operating mode, 1 up/down button control, 2 x alarm, status display
    • ETS additional function: repeater function
    • reset function (to factory setting)
    • scene saving lockable
    • scene opening via KNX radio appliances
    • quicklink functions: blind, 2 scenes, forced control, up/down push-button
    • with 2 mechanically and electrically mutually-locked relay contacts
    • with manual operation up/down
    • Activation, for example through switch, push-button, timer, blind timer switch
    • with configuration and function button
    Bus system radio frequent no
    Bus system LON no
    Bus system Powernet no
    Radio protocol KNX Radio
    Receiver category 2
    • with 2 independent, mains supplied, binary inputs for potential-free contacts
    Frequency 50 Hz
    Input signal current 33 µA
    Radio reception frequency 868,3 MHz
    Radio transmission/reception frequency 868,3 MHz
    Radio transmission power < 10 mW
    Input scanning voltage per channel 5 V
    Relative humidity (without condensation) 0…65 % (without condensation)
    Colour independent of design lines light grey
    Dimensions (Ø x H) 53 x 27 mm
    Diameter 53 mm
    Height 27 mm
    LED with configuration and function LEDs, with control LED (relay closed)
    Installation mode for installation behind flush-mounted inserts
    Conductor cross-section 0,75…2,5 mm²
    Connection with 2 independent battery-supplied binary inputs for potential-free contacts
    • with screw-in lift terminals
    • integration in the KNX radio/TP gateway, surface-mounted, into the KNX TP system
    Binary cable length, extendable to max. 5 m
    Binary cable length ≈ 20 cm
    Lamella adjustment on signal duration < 1 s
    • toolless quicklink configuration using buttons and LED display
    Number of radio channels 2
    Number of quicklink links max. 20 transmitter/receiver
    Self-retaining for 2 min on signal length > 1 s
    Transmitter duty cycle 1 %
    Change-over time for change of direction < 0,6 s
    General standards EN 50428, EN 60669-2-1, EN 300220-2, EN 301489-3, EN 50491-3
    Operating temperature 0…45 °C
    • low intrinsic energy requirement
    Application, usage KNX radio - actuators
    Product family product family: output
    Main design line Electronics platform
    Secondary design line(s) Berker.Net
  • Manual for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (DE-EN-IT, 2012-05)
    PDF, 171 KB
    Berker.Net - Conventional electronics platform Order Overview for Berker.Net - Conventional electronics platform
    Berker.Net - Conventional electronics platform
    PDF, 1,8 MB
    Berker Q.1 Catalogue Chapter for Berker Q.1
    Berker Q.1
    PDF, 17,9 MB
    KNX Database (from ETS3) for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (V101)
    VD5, 17,9 MB
    ETS Database for 85275100
    VD5, 17,9 MB
    KNX Database (from ETS4) for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (V101)
    KNXPROD, 15 MB
    ETS Database for 85275100
    KNXPROD, 15 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    PDF, 1,8 MB
    Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    PDF, 1,8 MB
    More (10)
    KNX radio blind actuator 1gang/binary input 2gang flush-mounted Electronics platform, light grey Product Data Sheet for 85275100
    KNX radio blind actuator 1gang/binary input 2gang flush-mounted Electronics platform, light grey
    PDF, 439 KB
Customers who bought this item also bought (15)
85876100
85876100

KNX radio binary input 2gang flush-mounted Electronics platform, light grey

85876200
85876200

KNX radio binary input 2gang flush-mounted 230 V Electronics platform, light grey

85265100
85265100

KNX radio blind actuator 1gang surface-mounted Electronics platform, white

85221100
85221100

Blind insert comfort Electronics platform

85020100
85020100

Power supply for KNX radio application module Electronics platform

85801200
85801200

KNX radio magnetic contact Electronics platform, polar white matt

85050100
85050100

KNX radio/TP gateway surface-mounted with integral bus coupling unit, Electronics platform, polar white matt

85865100
85865100

KNX radio switch actuator 1gang/binary input 1gang surface-mounted Electronics platform, white

85875100
85875100

KNX radio switch actuator 1gang/binary input 1gang flush-mounted Electronics platform, white

85166100
85166100

KNX radio switch actuator 2gang surface-mounted Electronics platform, white

85165100
85165100

KNX radio switch actuator 1gang surface-mounted Electronics platform, white

85122200
85122200

Switch insert 2gang Electronics platform

85475100
85475100

KNX radio universal dim actuator 1gang flush-mounted Electronics platform, light grey

85320100
85320100

Extension unit for motion detector Electronics platform

85105100
85105100

KNX radio switch actuator for plugs Electronics platform, polar white matt

* All data is subject to errors and technical modifications. All price values are recommended retail price values, exclusive of VAT.