85875100

KNX radio switch actuator 1gang/binary input 1gang flush-mounted Electronics platform, white
Product data sheet
Technical Properties
Download
  • KNX radio switch actuator 1gang/binary input 1gang flush-mounted Electronics platform, white
    Art No. 85875100
    EAN No. 4011334376118
    P.U. 1 part
    Price * on demand
    Price Group
    Technical Characteristics
    • ETS additional function: repeater function
    • ETS additional functions: +6 scenes, operating mode on/off, 1 up/down button control, push-button, 2 x alarm, status display
    • reset function (to factory setting)
    • scene saving lockable
    • scene opening via KNX radio appliances
    • quicklink functions: switching, 2 scenes, time switching, NO contact push-button, forced control
    • confectioned, with 2-core cable
    • with manual operation on/off
    • with configuration and function button
    • Activation, for example through switch, push-buttons, timer
    Bus system LON no
    Bus system Powernet no
    Bus system radio frequent no
    Radio protocol KNX Radio
    Receiver category 2
    • with independent, mains supplied, binary input for potential-free contact
    Input signal current 33 µA
    Radio reception frequency 868,3 MHz
    Radio transmission/reception frequency 868,3 MHz
    C-load no
    Output power 115 W
    Conventional transformers 800 VA
    Electronic transformers 600 W
    Radio transmission power < 10 mW
    • low intrinsic energy requirement
    Input scanning voltage 5 V
    Relative humidity (without condensation) 0 … 65 % (without condensation)
    Dimensions, sensor (Ø x H) 53 x 30 mm
    Colour independent of design lines white
    Ø 53 mm
    Fluorescent lamps parallel compensated 36 W
    • with transmission status and control LED for On/Off
    • with configuration and function LEDs
    230 V incandescent lamps and halogen lamps 1500 W
    • for installation behind flush-mounted inserts
    • with screw-in lift terminals
    • integration in the KNX radio/TP gateway, surface-mounted, into the KNX TP system
    Binary cable length, extendable to max. 5 m
    Binary cable length ≈ 20 cm
    Supported configuration modes system , easy , PB
    • toolless quicklink configuration using buttons and LED display
    Bus connection included no
    Different phases connectable no
    Number of radio channels 1
    Number of outputs 1
    Modular expandability no
    Number of quicklink links max. 20 transmitter/receiver
    Transmitter duty cycle 1 %
    Operating temperature 0 … 45 °C
    Application, usage KNX radio - actuators
    Product family product family: output
    Main design line Electronics platform
  • Manual for 85875100 - KNX radio switch actuator 1gang/binary input 1gang flush-mounted (DE-EN-IT, 2012-05)
    PDF, 174 KB
    Berker.Net - Conventional electronics platform Order Overview for Berker.Net - Conventional electronics platform
    Berker.Net - Conventional electronics platform
    PDF, 2,2 MB
    Berker B.3 Catalogue Chapter for Berker B.3
    Berker B.3
    PDF, 19,2 MB
    ETS Database for 85875100
    VD5, 14,9 MB
    ETS Database for 85875100
    KNXPROD, 12,4 MB
    KNX Database (from ETS4) for 85875100 - KNX radio switch actuator 1gang/binary input 1gang flush-mounted (V101)
    KNXPROD, 12,4 MB
    KNX Database (from ETS3) for 85875100 - KNX radio switch actuator 1gang/binary input 1gang flush-mounted (V101)
    VD5, 14,9 MB
    Application description ETS for 85865100-85875100 - KNX radio switch actuator 1gang/binary input 1gang (EN, vers. 6T8073-52A)
    PDF, 1,6 MB
    Application description ETS for 85865100-85875100 - KNX radio switch actuator 1gang/binary input 1gang (EN, vers. 6T8073-52A)
    PDF, 1,6 MB
    Application description ETS for 85865100-85875100 - KNX radio switch actuator 1gang/binary input 1gang (EN, vers. 6T8073-52A)
    PDF, 1,6 MB
    Application description ETS for 85865100-85875100 - KNX radio switch actuator 1gang/binary input 1gang (EN, vers. 6T8073-52A)
    PDF, 1,6 MB
    Application description ETS for 85865100-85875100 - KNX radio switch actuator 1gang/binary input 1gang (EN, vers. 6T8073-52A)
    PDF, 1,6 MB
    Application description ETS for 85865100-85875100 - KNX radio switch actuator 1gang/binary input 1gang (EN, vers. 6T8073-52A)
    PDF, 1,6 MB
    Application description ETS for 85865100-85875100 - KNX radio switch actuator 1gang/binary input 1gang (EN, vers. 6T8073-52A)
    PDF, 1,6 MB
    Application description ETS for 85865100-85875100 - KNX radio switch actuator 1gang/binary input 1gang (EN, vers. 6T8073-52A)
    PDF, 1,6 MB
    Application description ETS for 85865100-85875100 - KNX radio switch actuator 1gang/binary input 1gang (EN, vers. 6T8073-52A)
    PDF, 1,6 MB
    Application description ETS for 85865100-85875100 - KNX radio switch actuator 1gang/binary input 1gang (EN, vers. 6T8073-52A)
    PDF, 1,6 MB
    Application description ETS for 85865100-85875100 - KNX radio switch actuator 1gang/binary input 1gang (EN, vers. 6T8073-52A)
    PDF, 1,6 MB
    Application description ETS for 85865100-85875100 - KNX radio switch actuator 1gang/binary input 1gang (EN, vers. 6T8073-52A)
    PDF, 1,6 MB
    Application description ETS for 85865100-85875100 - KNX radio switch actuator 1gang/binary input 1gang (EN, vers. 6T8073-52A)
    PDF, 1,6 MB
    Application description ETS for 85865100-85875100 - KNX radio switch actuator 1gang/binary input 1gang (EN, vers. 6T8073-52A)
    PDF, 1,6 MB
    Application description ETS for 85865100-85875100 - KNX radio switch actuator 1gang/binary input 1gang (EN, vers. 6T8073-52A)
    PDF, 1,6 MB
    Application description ETS for 85865100-85875100 - KNX radio switch actuator 1gang/binary input 1gang (EN, vers. 6T8073-52A)
    PDF, 1,6 MB
    More (10)
    KNX radio switch actuator 1gang/binary input 1gang flush-mounted Electronics platform, white Product Data Sheet for 85875100
    KNX radio switch actuator 1gang/binary input 1gang flush-mounted Electronics platform, white
    PDF, 469 KB
Customers who bought this item also bought (5)
85875200
85875200

Radio switch actuator 1gang flush-mounted KNX

85875120
85875120

KNX radio switch actuator 1gang/binary input 2gang flush-mounted, 230 V, 4 A (2-wire) Electronics platform

85876200
85876200

KNX radio binary input 2gang flush-mounted 230 V Electronics platform, light grey

85875121
85875121

KNX radio switch actuator 1gang/binary input 2gang flush-mounted, 230 V, 3 A (3-wire) Electronics platform

85875110
85875110

KNX radio push-button actuator flush-mounted KNX

* All data is subject to errors and technical modifications. All price values are recommended retail price values, exclusive of VAT.