Switch actuator/blind actuator 16/18gang pro RMD for C load 16 A with plug-in terminals, KNX, light grey
Product data sheet
Technical Properties
  • Switch actuator/blind actuator 16/18gang pro RMD for C load 16 A with plug-in terminals, KNX, light grey
    Art No. 75319004
    EAN No. 4011334417125
    P.U. 1 part
    Price * on demand
    Price Group
    Technical Characteristics
    Bus system yes
    Fixing mode REG
    Operating mode any combined operation from drive and switching functions possible
    • suitable to switch different external conductors
    • with positioning function for blind and lamella position
    • with safety functions e.g. for wind, rain, alarm
    • with sun shade function
    • For switching, e.g. of 10 independent loads or activation of 5 drives
    Indicator lamp yes
    • Manual operation can be activated via selection switch, thereby deactivation of the KNX function
    • manual operation per channel using button (single-area operation)
    • status LED integrated in the manual operation button
    • manual operation buttons for on/off (up/down) and bus function on/off per channel/device
    • with illuminated programming button
    Bus system radio frequent no
    Bus system LON no
    Bus system Powernet no
    Rated operational voltage Ue 230 V
    Rated current 16 A
    Operating voltage over bus 21…32 V DC
    Output voltage 230 V~
    System supply voltage 30V DC via bus
    Bus current consumption (data transfer) 5 mA
    Bus current consumption (idle) 3 mA
    Maximum through current 16 A
    Rated current 16 A
    Max. power with electronic transfo. 1500 W
    Output power 2300 W
    Max. switching power 25300 W
    Conventional transformers 1500 VA
    Electronic transformers 1500 W
    C-load yes
    Colour light grey
    Depth 65 mm
    Width of rail mounted device (RMD) 8 modules
    Height 90 mm
    Fluorescent lamps with electronical ballast (EB) 20 x 36 W
    - uncompensated 1200 VA
    Energy-saving lamps 25 x 18 W
    Power lighting fluo lamps 25x18W
    Max. power fluo. duo lamp comp. series 27 X 36W
    Fluorescent lamps parallel compensated 1000 W /130 µF
    Max number of LED/CFL lamps 25
    230V LED lamps 25 x 18 W
    Power LED 450 W
    LED Status LED integrated in manual operation button
    Max. power with incandescent lamps 2300 W
    230 V incandescent lamps 2300 W
    230 V halogen lamps 2300 W
    230 V incandescent lamps and halogen lamps 2300 W
    Connection cross-sect. flexible conductor 0,5 / 4mm²
    Connection cross-sect. rigid cable 0,5 / 6mm²
    Type of load C-Load
    Conductor cross-section (flexible) 0,5…4 mm²
    Conductor cross-section (rigid) 0,5…6 mm²
    Type of contacts 16F
    Type of connection with screw
    • with integral bus coupling unit
    • with QuickConnect plug-in terminals
    • bus connection via connecting terminal
    Supported configuration modes system
    • switching time on change of direction adjustable
    Bus connection included yes
    Modular expandability no
    Different phases connectable yes
    With slide for manual switch yes
    • with potential-free NO contacts as well as NC contact parameterisable
    Differentiation characteristic 3 - Sales with plug-in terminals
    Protection index IP IP20
    Operating temperature -5…45 °C
    Storage/transport temperature -20…70 °C
    Device family TYM
    Main design line KNX
Customers who bought this item also bought (2)

Switch actuator/blind actuator 20/10gang pro RMD for C load 16 A with plug-in terminals, KNX, light grey


Switch actuator/blind actuator 10/5gang pro RMD for C load 16 A with plug-in terminals, KNX, light grey

* All data is subject to errors and technical modifications. All price values are recommended retail price values, exclusive of VAT.