-
Universal dim actuator 2gang pro RMD 300 W KNX, light grey Art No. 75312114 EAN No. 4011334420354 P.U. 1 part Price * on demand Price Group Bus system yes Fixing mode REG Bus module detachable no Operating mode load coupling of 2 channels to increase output power using parallel connection of the outputs - suitable to switch different external conductors
- Learning function for optimised operation of compact fluorescent lamps and LED luminaires can be activated via the bus
- bulb-preserving soft startup
With LED indication yes Indicator lamp yes - manual operation also possible without bus, e.g. on building site
- Manual operation can be activated via selection switch, thereby deactivation of the KNX function
- Manual operation per channel via button with integrated status LED, thereby lockout of KNX function
- status LED integrated in the manual operation button
- selection switch for manual/bus operation as well as load setting
- with illuminated programming button
Bus system radio frequent no Bus system LON no Bus system Powernet no Frequency 50/60 Hz Rated current 2600 mA Auxiliary voltage 230 V AC Input voltage 230 V AC Operating voltage over bus 21…32 V DC Bus current consumption (data transfer) 2,4 mA Fuse short-circuit proof and overload proof (display using LEDs), overheating protection (display using LEDs) Incandescent bulb power 5 / 300 W Total power loss under IN 0,35 W Power dissipation per coil 0,53 W Supply voltage 230 V AC Width of rail mounted device (RMD) 4 modules Power lighting fluo lamps 60W Max number of LED/CFL lamps 8 Power LED 60 W LED Status LED integrated in manual operation button, Overheating protection, display using LEDs, Overload protection, display via LED Connection cross-sect. flexible conductor 0,75 / 2,5mm² Connection cross-sect. rigid cable 0,75 / 2.5mm² Type of load universal Conductor cross-section (flexible) 0,75…2,5 mm² Conductor cross-section (rigid) 0,75…2,5 mm² Type of connection quick connect - with integral bus coupling unit
- with QuickConnect plug-in terminals
- bus connection via connecting terminal
Supported configuration modes system - parameter definable behaviour in the event of bus voltage failure/return
Bus connection included yes Type of dimmer dimming actuator Modular expandability no With slide for manual switch yes - phase cut-on or cut-off according to load type, self-learning
- minimum/maximum dimming values per channel settable on device
- very low noise
Local operation/hand operation yes Protection index IP IP20 Halogen free no - with overheating, overload and short-circuit protection
Operating temperature -5…45 °C Storage/transport temperature -20…70 °C Main design line KNX -
-
Instruction manuals for 75312114
PDF
Order Overview for Dim actuators RMD
Dim actuators RMDPDF, 660 KB 
Catalogue Chapter for Berker KNX - system
Berker KNX - systemPDF, 7,7 MB 
ETS Database for 75312114
KNXPROD, 307 KB
Product Data Sheet for 75312114
Universal dim actuator 2gang pro RMD 300 W KNX, light greyPDF, 603 KB
Customers who bought this item also bought (4)
* All data is subject to errors and technical modifications. All price values are recommended retail price values, exclusive of VAT.