Universal dim actuator 1gang pro RMD 600 W KNX, light grey
Product data sheet
Technical Properties
  • Universal dim actuator 1gang pro RMD 600 W KNX, light grey
    Art No. 75311112
    EAN No. 4011334417316
    P.U. 1 part
    Price * on demand
    Price Group
    Technical Characteristics
    Bus system yes
    Fixing mode REG
    Bus module detachable no
    • suitable to switch different external conductors
    • Learning function for optimised operation of compact fluorescent lamps and LED luminaires can be activated via the bus
    • bulb-preserving soft startup
    With LED indication yes
    Indicator lamp yes
    • manual operation also possible without bus, e.g. on building site
    • Manual operation can be activated via selection switch, thereby deactivation of the KNX function
    • Manual operation per channel via button with integrated status LED, thereby lockout of KNX function
    • status LED integrated in the manual operation button
    • selection switch for manual/bus operation as well as load setting
    • with illuminated programming button
    Bus system radio frequent no
    Bus system LON no
    Bus system Powernet no
    Frequency 50/60 Hz
    Rated current 4 mA
    Auxiliary voltage 230 V AC
    Input voltage 230 V AC
    Operating voltage over bus 21…32 V DC
    Bus current consumption (data transfer) 2,3 mA
    Fuse short-circuit proof and overload proof (display using LEDs), overheating protection (display using LEDs)
    Incandescent bulb power 600 W
    Total power loss under IN 320 mW
    Power dissipation per coil 180 mW
    Supply voltage 230 V AC
    Colour light grey
    Width of rail mounted device (RMD) 4 modules
    Power lighting fluo lamps 60W
    Max number of LED/CFL lamps 8
    Power LED 60 W
    LED Status LED integrated in manual operation button, Overheating protection, display using LEDs, Overload protection, display via LED
    Connection cross-sect. flexible conductor 0,75 / 2,5mm²
    Connection cross-sect. rigid cable 0,75 / 2.5mm²
    Type of load universal
    Conductor cross-section (flexible) 0,75…2,5 mm²
    Conductor cross-section (rigid) 0,75…2,5 mm²
    Type of connection quick connect
    • with integral bus coupling unit
    • with QuickConnect plug-in terminals
    • bus connection via connecting terminal
    Supported configuration modes system
    • parameter definable behaviour in the event of bus voltage failure/return
    Bus connection included yes
    Type of dimmer dimming actuator
    Modular expandability no
    With slide for manual switch yes
    • phase cut-on or cut-off according to load type, self-learning
    • minimum/maximum dimming values per channel settable on device
    • very low noise
    Local operation/hand operation yes
    Protection index IP IP20
    Halogen free no
    • with overheating, overload and short-circuit protection
    Operating temperature -5…45 °C
    Storage/transport temperature -20…70 °C
    Main design line KNX
  • Dim actuators RMD Order Overview for Dim actuators RMD
    Dim actuators RMD
    PDF, 700 KB
    Berker KNX - system Catalogue Chapter for Berker KNX - system
    Berker KNX - system
    PDF, 7,7 MB
    Universal dim actuator 1gang pro RMD 600 W KNX, light grey Product Data Sheet for 75311112
    Universal dim actuator 1gang pro RMD 600 W KNX, light grey
    PDF, 618 KB
* All data is subject to errors and technical modifications. All price values are recommended retail price values, exclusive of VAT.