75524001

Analogue actuator module 4gang RMD with screw-in lift terminals, KNX, light grey
Product data sheet
Technical Properties
Download
Typelist
  • Analogue actuator module 4gang RMD with screw-in lift terminals, KNX, light grey
    Art No. 75524001
    EAN No. 4011334272427
    P.U. 1 part
    Price * on demand
    Price Group
    Technical Characteristics
    Fixing mode REG
    Bus system radio frequent no
    Bus system LON no
    Bus system Powernet no
    Connector AST with system plug for connection to the analogue actuator system interface
    Output signals according to DIN IEC 381
    • cyclic supervision of the outputs
    • with 4 independant analogue outputs
    Frequency 50/60 Hz
    Auxiliary voltage 24 V AC
    Operating voltage over bus 21…32 V DC
    Voltage, outputs 0 ... 1; 0 ... 10 V
    Outputs current 0 ... 20, 4 ... 20 mA
    Output current per channel max. 20 mA
    Current consumption max. 170 mA
    Total power loss under IN 7,5 W
    Output load current < 500 Ω
    Output load voltage > 1 kΩ
    Colour independent of design lines light grey
    RAL colour RAL 7035 - Light grey
    Depth 70 mm
    Assembling height as from DIN rail 63 mm
    Width of rail mounted device (RMD) 4 modules
    Height 90 mm
    Width 72 mm
    LED with 4 yellow output status LEDs, with green/red status LED (operation/fault)
    Conductor cross-section (flexible), with wire end sleeve 0,14…2,5 mm²
    Conductor cross-section (flexible), without wire end sleeve 0,34…4 mm²
    Conductor cross-section (rigid) 0,5…4 mm²
    • with screw terminals
    Supported configuration modes system
    Bus connection included yes
    • as extension for analogue actuator 4gang
    Number of outputs 4
    Modular expandability no
    Forced controls (1-bit objects) per channel 2
    Differentiation characteristic 3 - Sales with screw-in lift terminals
    Protection index IP IP20
    Halogen free no
    Operating temperature -5…45 °C
    Main design line KNX
  • Analogue actuators Order Overview for Analogue actuators
    Analogue actuators
    PDF, 388 KB
    Berker KNX - system Catalogue Chapter for Berker KNX - system
    Berker KNX - system
    PDF, 7,7 MB
    Analogue actuator module 4gang RMD with screw-in lift terminals, KNX, light grey Product Data Sheet for 75524001
    Analogue actuator module 4gang RMD with screw-in lift terminals, KNX, light grey
    PDF, 430 KB
  • Art No. Description P.U.
    75514001 Analogue actuator 4gang RMD with screw-in lift terminals,  KNX,  light grey
    75514001 Analogue actuator 4gang RMD with screw-in lift terminals,  KNX,  light grey
    75514001 Analogue actuator 4gang RMD with screw-in lift terminals, KNX, light grey 1 prt.
* All data is subject to errors and technical modifications. All price values are recommended retail price values, exclusive of VAT.