85875122

KNX radio switch actuator 1gang/binary input 2gang flush-mounted, 12...230 V AC, 12...24 V DC Electronics platform
Product data sheet
Technical Properties
Download
  • KNX radio switch actuator 1gang/binary input 2gang flush-mounted, 12...230 V AC, 12...24 V DC Electronics platform
    Art No. 85875122
    EAN No. 4011334418665
    P.U. 1 part
    Price * on demand
    Price Group
    Technical Characteristics
    Bus system yes
    • ETS additional functions: +6 scenes, operating mode on/off, 1 up/down button control, push-button, 2 x alarm, status display
    • reset function (to factory setting)
    • scene saving lockable
    • scene opening via KNX radio appliances
    • quicklink functions: switching, 2 scenes, time switching, NO contact push-button, forced control
    • confectioned, with 2-core cable
    Indicator lamp yes
    • with manual operation on/off
    • Activation, for example through switch, push-buttons, timer
    • with configuration and function button
    Bus system radio frequent yes
    Bus system LON no
    Bus system Powernet no
    Radio protocol KNX Radio
    Receiver category 2
    • with independent, mains supplied, binary input for potential-free contact
    System supply voltage 230V AC
    Number of entry circuits 2
    Input signal current 33 µA
    Maximum through current 4 A
    Withstand current in AC1 for the contact path or zone 1 4 A
    Transmission frequency 868 MHz
    Radio reception frequency 868,3 MHz
    Radio transmission/reception frequency 868,3 MHz
    Total power loss under IN 150 mW
    Power dissipation per coil 150 mW
    Electronic transformers 600 W
    Radio transmission power < 10 mW
    C-load yes
    Input scanning voltage 5 V
    Relative humidity (without condensation) 0…65 % (without condensation)
    Dimensions, sensor (Ø x H) 53 x 30 mm
    Colour independent of design lines light grey
    Height of installed product 40 mm
    Dimensions (LLxwwxhh) 40x40x20
    Diameter 53 mm
    Height 30 mm
    Power lighting fluo lamps 40W
    Max. power fluo. duo lamp comp. series 40W
    Fluorescent lamps parallel compensated 36 W
    Max number of LED/CFL lamps 5
    Power LED 40 W
    LED with transmission status and control LED for On/Off, with configuration and function LEDs
    Max. power with incandescent lamps 600 W
    230 V incandescent lamps and halogen lamps 1500 W
    Installation mode for installation behind flush-mounted inserts
    Connection cross-sect. flexible conductor 0,5 / 1,5mm²
    Connection cross-sect. rigid cable 0,5 / 1,5mm²
    Type of contacts 1NO
    Type of connection with screw
    • with screw-in lift terminals
    • integration in the KNX radio/TP gateway, surface-mounted, into the KNX TP system
    Binary cable length, extendable to max. 5 m
    Binary cable length ≈ 20 cm
    Supported configuration modes system, easy, PB
    • toolless quicklink configuration using buttons and LED display
    Bus connection included yes
    Number of outputs 1
    Number of radio channels 1
    Number of quicklink links max. 20 transmitter/receiver
    Modular expandability no
    Transmitter duty cycle 1 %
    Different phases connectable no
    With slide for manual switch yes
    Operating temperature -10…50 °C
    Storage/transport temperature -20…70 °C
    • low intrinsic energy requirement
    Application, usage KNX radio - actuators
    Product family product family: output
    Device family TRM
    Main design line Electronics platform
  • Actuators flush-mounted/surface-mounted Order Overview for Actuators flush-mounted/surface-mounted
    Actuators flush-mounted/surface-mounted
    PDF, 464 KB
    Berker KNX - system Catalogue Chapter for Berker KNX - system
    Berker KNX - system
    PDF, 7,7 MB
    KNX radio switch actuator 1gang/binary input 2gang flush-mounted, 12...230 V AC, 12...24 V DC Electronics platform Product Data Sheet for 85875122
    KNX radio switch actuator 1gang/binary input 2gang flush-mounted, 12...230 V AC, 12...24 V DC Electronics platform
    PDF, 393 KB
Customers who bought this item also bought (4)
85875110
85875110

KNX radio push-button actuator flush-mounted KNX

85875200
85875200

Radio switch actuator 1gang flush-mounted KNX

85875120
85875120

KNX radio switch actuator 1gang/binary input 2gang flush-mounted, 230 V, 4 A (2-wire) Electronics platform

85875100
85875100

KNX radio switch actuator 1gang/binary input 1gang flush-mounted Electronics platform, white

* All data is subject to errors and technical modifications. All price values are recommended retail price values, exclusive of VAT.