75342012

Switch actuator/blind actuator 2/1gang pro RMD flush-mounted 6 A with screw terminals, KNX, ligth grey
Product data sheet
Technical Properties
Download
  • Switch actuator/blind actuator 2/1gang pro RMD flush-mounted 6 A with screw terminals, KNX, ligth grey
    Art No. 75342012
    EAN No. 4011334403807
    P.U. 1 part
    Price * on demand
    Price Group
    Technical Characteristics
    Number of outputs 2
    Bus system yes
    Fixing mode flush-mounting
    • for 1 phase operation
    • with positioning function for blind and lamella position
    • with safety functions e.g. for wind, rain, alarm
    • with sun shade function
    Indicator lamp yes
    • manual operation in test mode via programming button (single-area operation)
    • test mode/building site mode can be activated via programming button
    • with illuminated programming button
    • for activation of a drive for alternating current
    Bus system LON no
    Bus system Powernet no
    Bus system radio frequent no
    Rated current 6 A
    Rated operational voltage Ue 230 V
    Max. switching capacity at 230 V AC
    Operating voltage over bus 21 … 32 V DC
    System supply voltage 30V DC via bus
    Bus current consumption (data transfer) ≈ 7 mA
    Bus current consumption (idle) ≈ 5 mA
    Maximum through current 6 A
    Switching current at cos φ = 0.8 max. 6 A
    Withstand current in AC1 for the contact path or zone 1 6 A
    Max. power with electronic transfo. 500 W
    Total power loss under IN 0,5 W
    C-load no
    Output power 500 W
    Conventional transformers 500 VA
    Electronic transformers 500 W
    Colour light grey
    Height of installed product 44 mm
    Dimensions (LLxwwxhh) 44 x 43 x 22 mm
    - uncompensated 500 VA
    Fluorescent lamps with electronical ballast (EB) 6 x 48 W
    Max. power fluo. duo lamp comp. series 6 x 48W
    Power lighting fluo lamps 5 x 13W
    Max number of LED/CFL lamps 5
    Power LED 65 W
    230V LED lamps 5 x 13 W
    230 V incandescent lamps and halogen lamps 500 W
    Max. power with incandescent lamps 500 W
    Conductor cross-section (flexible) 0,75 … 2,5 mm²
    Conductor cross-section (rigid) 0,75 … 2,5 mm²
    Connection cross-sect. rigid cable 0,75 / 2.5mm²
    Connection cross-sect. flexible conductor 0,75 / 2,5mm²
    Type of connection with screw
    Number of contacts 2
    Type of contacts 1NO
    • with integral bus coupling unit
    • with screw terminals
    • bus connection via pre-assembled cable with bus connection terminal
    Supported configuration modes system
    • switching time on change of direction adjustable
    Bus connection included yes
    Different phases connectable no
    Modular expandability no
    • with screw terminals
    Protection index IP IP20
    Operating temperature -5 … 45 °C
    Storage temperature -20 to 70 °C
    Storage/transport temperature -20 … 70 °C
    Device family TYB
    Main design line KNX
  • Instruction manuals for 75342012
    PDF, 637 KB
    Actuators flush-mounted/surface-mounted Order Overview for Actuators flush-mounted/surface-mounted
    Actuators flush-mounted/surface-mounted
    PDF, 465 KB
    Berker KNX - system Catalogue Chapter for Berker KNX - system
    Berker KNX - system
    PDF, 7,7 MB
    ETS Database for 75342012
    KNXPROD, 298 KB
    Switch actuator/blind actuator 2/1gang pro RMD flush-mounted 6 A with screw terminals, KNX, ligth grey Product Data Sheet for 75342012
    Switch actuator/blind actuator 2/1gang pro RMD flush-mounted 6 A with screw terminals, KNX, ligth grey
    PDF, 264 KB
Customers who bought this item also bought (1)
75341012
75341012

Switch actuator/blind actuator 2/1gang pro + binary input 2gang flush-mounted 6 A with screw terminals, KNX, ligth grey

* All data is subject to errors and technical modifications. All price values are recommended retail price values, exclusive of VAT.