75341011

Switch actuator 1gang pro flush-mounted 10 A with screw-in lift terminals, KNX, light grey
Product data sheet
Technical Properties
Download
  • Switch actuator 1gang pro flush-mounted 10 A with screw-in lift terminals, KNX, light grey
    Art No. 75341011
    EAN No. 4011334403777
    P.U. 1 part
    Price * on demand
    Price Group
    Technical Characteristics
    Number of outputs 1
    Bus system KNX
    Fixing mode flush-mounting
    Technical version 1gang
    • for 1 phase operation
    • for switching e.g. 1 load
    Indicator lamp yes
    • with manual operation on/off
    • with illuminated programming button/button for manual operation
    Bus system LON no
    Bus system Powernet no
    Bus system radio frequent no
    Frequency 50/60 Hz
    Rated current 10 A
    Rated operational voltage Ue 230 V
    Max. switching capacity at 230 V AC
    Operating voltage over bus 21 … 32 V DC
    System supply voltage 30V DC via bus
    Bus current consumption (data transfer) ≈ 7 mA
    Bus current consumption (idle) ≈ 5 mA
    Maximum through current 10 A
    Switching current at cos φ = 0.8 max. 10 A
    Withstand current in AC1 for the contact path or zone 1 10 A
    Max. power with electronic transfo. 600 W
    Total power loss under IN 0,6 W
    Output power 600 W
    Max. switching power 600 W
    Conventional transformers 600 VA
    Electronic transformers 600 W
    Colour light grey
    Height of installed product 44 mm
    Dimensions (LLxwwxhh) 44x43x22 mm
    - uncompensated 600 W
    Fluorescent lamps with electronical ballast (EB) 6 x 58 W
    Quantity energy-saving lamps max. 5
    Energy-saving lamps 5 x 15 W
    Max. power fluo. duo lamp comp. series 6 x 58W
    Power lighting fluo lamps 5 x 15W
    Quantity LED lamps max. 5
    Power LED 75 W
    230V LED lamps 5 x 15 W
    • with red programming LED
    • with status LED
    230 V halogen lamps 600 W
    230 V incandescent lamps and halogen lamps 600 W
    Max. power with incandescent lamps 600 W
    230 V incandescent lamps 600 W
    Conductor cross-section (flexible) 0,5 … 2,5 mm²
    Conductor cross-section (rigid) 0,5 … 2,5 mm²
    Connection cross-sect. rigid cable 0,5 / 2,5mm²
    Connection cross-sect. flexible conductor 0,5 / 2,5mm²
    Type of connection with screw
    Number of contacts 1
    Type of contacts 2NO
    • with integral bus coupling unit
    • with screw terminals
    • bus connection via pre-assembled cable with bus connection terminal
    Supported configuration modes system
    Bus connection included yes
    • installation in flush-mounted or splash-protected junction box
    Modular expandability no
    • with potential-free NO contact as well as NC contact parameterisable
    • with screw-in lift terminals
    Protection index IP IP20
    Operating temperature -5 … 45 °C
    Storage temperature -20 to 70 °C
    Storage/transport temperature -20 … 70 °C
    Device family TYB
    Main design line KNX
  • Instruction manuals for 75341011
    PDF, 493 KB
    Actuators flush-mounted/surface-mounted Order Overview for Actuators flush-mounted/surface-mounted
    Actuators flush-mounted/surface-mounted
    PDF, 465 KB
    Berker KNX - system Catalogue Chapter for Berker KNX - system
    Berker KNX - system
    PDF, 7,7 MB
    ETS Database for 75341011
    KNXPROD, 152 KB
    Switch actuator 1gang pro flush-mounted 10 A with screw-in lift terminals, KNX, light grey Product Data Sheet for 75341011
    Switch actuator 1gang pro flush-mounted 10 A with screw-in lift terminals, KNX, light grey
    PDF, 348 KB
* All data is subject to errors and technical modifications. All price values are recommended retail price values, exclusive of VAT.