Product data sheet
Technical Properties
    Art No. 85875120
    EAN No. 4011334418641
    P.U. 1 PART
    Technical Characteristics
    Frequency 50 Hz
    Input scanning voltage 5 V
    230 V incandescent lamps and halogen lamps 1500 W
    - parallel compensated 36 W
    Electronic transformers 600 W
    Radio transmission/reception frequency 868,3 MHz
    Radio protocol KNX Radio
    Radio reception frequency 868,3 MHz
    Transmitter duty cycle 1 %
    Receiver category 2
    Number of radio channels 1
    Number of quicklink links max. 20 transmitter/receiver
    Radio transmission power < 10 mW
    Radio transmission range (free field) max. 100 m
    Radio transmission range (building) max. 30 m
    Operating temperature -5 … 45 °C
    Binary cable length ≈ 20 cm
    Binary cable length, extendable to max. 5 m
    Dimensions, sensor (Ø x H) 53 x 30 mm
    Energy-saving low intrinsic energy requirement
    Function reset function (to factory setting)
    quicklink functions quicklink functions: switching, 2 scenes, time switching, NO contact push-button, forced control ; quicklink functions: switching, dimming, 2 scenes, time switching, NO contact push-button, forced control, forced control, up/down push-button
    Bus connection integration in the KNX radio/TP gateway, surface-mounted, into the KNX TP system
    ETS additional functions ETS additional functions: +6 scenes, operating mode on/off, 1 up/down button control, push-button, 2 x alarm, status display ; ETS additional function: repeater function
    LED with transmission status and control LED for On/Off ; with configuration and function LEDs
    Button / push-button with configuration and function button
    Operation with manual operation on/off
    Light scenes scene saving lockable ; scene opening via KNX radio appliances
    Programming toolless quicklink configuration using buttons and LED display
    inputs with independent, mains supplied, binary input for potential-free contact
    Control Activation, for example through switch, push-buttons, timer
    Pre-assembled confectioned, with 2-core cable
    Installation mode for installation behind flush-mounted inserts
    Type of connection with screw-in lift terminals
  • Instruction manuals for 85875120
    PDF, 860 KB
    Installation manuals for 85875120
    PDF, 24,5 MB
    Binary inputs and switch actuators Order Overview for Binary inputs and switch actuators
    Binary inputs and switch actuators
    PDF, 603 KB
    Berker KNX - quicklink Catalogue Chapter for Berker KNX - quicklink
    Berker KNX - quicklink
    PDF, 2,5 MB
    ETS Database for 85875120
    KNXPROD, 519 KB
    1 FM OUTPUT 200W. 2WIRES+2INPUTS Product Data Sheet for 85875120
    PDF, 261 KB
All data is subject to errors and technical modifications.