REQUIREMENTS
Whatever application the TS Sensor is planned for, it must be ensured that sufficient space is available for the installation – even rough installation requires the use of a "wall box 2gang for glass sensor". This is because several devices, some of which are quite large, have to be housed in the wall box, as well as the cabling/wiring. In addition, the glass sensor requires a separate power supply, which in KNX/EIB applications can be wired-through from the non-choked output of the RMD power supply to the universal interface (yellow, white wire).

CONNECTION
In KNX/EIB applications, additional outputs must be provided at the interfaces for activation of the LEDs, or an additional interface must be planned in. The "EIB adapter 2 x 8gang" can be plugged into up to two "universal interfaces 8gang comfort flush-mounted" without any wiring and fastened to them with screws. The "universal adapter" in contrast has screw terminals that an interface of the bus system can be wired to, for example.
The power supply provided by the user must be connected to the adapter. Power is provided to the glass sensor via the supplied ribbon cable, which is used to connect the glass plate to the adapter. This way actions on the glass sensor can be transmitted over the interfaces to the bus system or directly to relay circuits.