85345182

KNX radio motion detector comfort 1.1 m quicklink Berker S.1, white glossy
Product data sheet
Technical Properties
Download
Accessories
Typelist
  • KNX radio motion detector comfort 1.1 m quicklink Berker S.1, white glossy
    Art No. 85345182
    EAN No. 4011334373964
    P.U. 1 part
    Technical Characteristics
    • µ-processor controlled mode of operation
    • ETS additional functions: +6 scenes, operating mode on/off, push-button, status display, dimming value, brightness display, movement scene loading, no movement scene loading
    • reset function (to factory setting)
    • Party function for switching on for 2 hours
    • with memory function for presence simulation
    • with keylock
    • Switch-off pre-warning on dimmer inserts
    • Teach function for response brightness via button
    • scene opening via KNX radio appliances
    • scene saving lockable
    • quicklink functions: switching, dimming, 2 scenes, time switching, NO contact push-button, Memory, forced control, Master-Slave
    • optional operation of extension units using installation push-button
    • remote control via quicklink transmitter
    • with configuration and function button
    • with button for on/off/automatic/memory/party function
    Radio protocol KNX Radio
    Receiver category 2
    Radio transmission frequency 868,3 MHz
    Radio transmission power < 10 mW
    Relative humidity (without condensation) 0 … 65 % (without condensation)
    Detection field, rectangular shaped ≈ 12 x 16 m
    Range, frontal ≈ 12 m
    Range, side each ≈ 8 m
    Number of detection levels 2
    Detection angle, settable each side ≈ 45 … 90 °
    Colour of design line white
    RAL colour RAL 1013 - Oyster white
    Material thermoplastic
    Surface appearance glossy
    Assembling height 34 mm
    Nominal mounting height 1,1 m
    Response brightness, adjustable ≈ 5 … 1000 lx , daytime operation
    • LED application module/insert compatibility display
    • with configuration and function LEDs
    • with operation and status LED, red/green/orange
    • integration in the KNX radio/TP gateway, surface-mounted, into the KNX TP system
    Response sensitivity, settable 10 … 100 %
    Delay time, adjustable ≈ 1 s … 3 h
    Switch-off pre-warning to dimming value 50% for 30 s
    Number of radio channels 1
    Number of quicklink links max. 20 transmitter/receiver
    Transmitter duty cycle 1 %
    • with dismantling protection
    Operating temperature -5 … 45 °C
    • low intrinsic energy requirement
    Application, usage Motion detector, KNX radio- sensors
    Main design line Berker S.1
    Secondary design line(s) Berker.Net, Motion detector
    • Continuous direct sunlight penetrating the upward-pointing detection plane can result in failure of the motion detector.
      Only suitable for indoor areas!
  • Manual for 853451xx-853461xx - Radio motion detector comfort 1.1 m - 2.2 m quicklink (EN, 2017-11)
    PDF, 4,1 MB
    Berker.Net - Conventional electronics platform Order Overview for Berker.Net - Conventional electronics platform
    Berker.Net - Conventional electronics platform
    PDF, 2,2 MB
    Berker S.1 Catalogue Chapter for Berker S.1
    Berker S.1
    PDF, 19,6 MB
    KNX Database (from ETS3) for 853451xx-853461xx - KNX radio motion detector comfort quicklink (V101)
    VD5, 17,4 MB
    KNX Database (from ETS4) for 853451xx-853461xx - KNX radio motion detector comfort quicklink (V101)
    KNXPROD, 14,5 MB
    Application description ETS for 853451xx-853461xx - KNX radio motion detector comfort quicklink (EN, vers. 6T8015-51b)
    PDF, 3,1 MB
    Application description ETS for 853451xx-853461xx - KNX radio motion detector comfort quicklink (EN, vers. 6T8015-52b)
    PDF, 3 MB
    KNX radio motion detector comfort 1.1 m quicklink Berker S.1, white glossy Product Data Sheet for 85345182
    KNX radio motion detector comfort 1.1 m quicklink Berker S.1, white glossy
    PDF, 549 KB
  • Art No. Description P.U.
    85020100 Power supply for KNX radio application module Electronics platform
    85020100 Power supply for KNX radio application module Electronics platform
    85020100 Power supply for KNX radio application module Electronics platform 1 prt.
    85121100 Switch insert 1gang Electronics platform
    85121100 Switch insert 1gang Electronics platform
    85121100 Switch insert 1gang Electronics platform 1 prt.
    85121200 Relay insert Electronics platform
    85121200 Relay insert Electronics platform
    85121200 Relay insert Electronics platform 1 prt.
    85421100 Touch dimmer (R,  L) Electronics platform,  others
    85421100 Touch dimmer (R,  L) Electronics platform,  others
    85421100 Touch dimmer (R, L) Electronics platform, others 1 prt.
    85421200 Universal touch dimmer 1gang Electronics platform,  others
    85421200 Universal touch dimmer 1gang Electronics platform,  others
    85421200 Universal touch dimmer 1gang Electronics platform, others 1 prt.
  • Art No. Description P.U.
    85020100 Power supply for KNX radio application module Electronics platform
    85020100 Power supply for KNX radio application module Electronics platform
    85020100 Power supply for KNX radio application module Electronics platform 1 prt.
    85121100 Switch insert 1gang Electronics platform
    85121100 Switch insert 1gang Electronics platform
    85121100 Switch insert 1gang Electronics platform 1 prt.
    85121200 Relay insert Electronics platform
    85121200 Relay insert Electronics platform
    85121200 Relay insert Electronics platform 1 prt.
    85421100 Touch dimmer (R,  L) Electronics platform,  others
    85421100 Touch dimmer (R,  L) Electronics platform,  others
    85421100 Touch dimmer (R, L) Electronics platform, others 1 prt.
    85421200 Universal touch dimmer 1gang Electronics platform,  others
    85421200 Universal touch dimmer 1gang Electronics platform,  others
    85421200 Universal touch dimmer 1gang Electronics platform, others 1 prt.
All data is subject to errors and technical modifications.