85345122

Berker Q.1/Q.3
Product data sheet
Technical Properties
Download
  • Berker Q.1/Q.3
    Art No. 85345122
    EAN No. 4011334428213
    P.U. 1 part
    Technical Characteristics
    • µ-processor controlled mode of operation
    • ETS additional functions: +6 scenes, operating mode on/off, push-button, status display, dimming value, brightness display, movement scene loading, no movement scene loading
    • reset function (to factory setting)
    • Party function for switching on for 2 hours
    • with memory function for presence simulation
    • with keylock
    • Switch-off pre-warning on dimmer inserts
    • Teach function for response brightness via button
    • scene opening via KNX radio appliances
    • scene saving lockable
    • quicklink functions: switching, dimming, 2 scenes, time switching, NO contact push-button, Memory, forced control, Master-Slave
    • optional operation of extension units using installation push-button
    • remote control via quicklink transmitter
    • with configuration and function button
    • with button for on/off/automatic/memory/party function
    Radio protocol KNX Radio
    Receiver category 2
    Radio transmission frequency 868,3 MHz
    Radio transmission power < 10 mW
    Relative humidity (without condensation) 0 … 65 % (without condensation)
    Detection field, rectangular shaped ≈ 12 x 16 m
    Range, frontal ≈ 12 m
    Range, side each ≈ 8 m
    Number of detection levels 2
    Detection angle, settable each side ≈ 45 … 90 °
    Colour of design line white
    RAL colour RAL 9010 - Pure white
    Material thermoplastic
    Assembling height 34 mm
    Nominal mounting height 1,1 m
    Response brightness, adjustable ≈ 5 … 1000 lx , daytime operation
    • LED application module/insert compatibility display
    • with configuration and function LEDs
    • with operation and status LED, red/green/orange
    • integration in the KNX radio/TP gateway, surface-mounted, into the KNX TP system
    Response sensitivity, settable 10 … 100 %
    Delay time, adjustable ≈ 1 s … 3 h
    Switch-off pre-warning to dimming value 50% for 30 s
    Number of radio channels 1
    Number of quicklink links max. 20 transmitter/receiver
    Transmitter duty cycle 1 %
    • with dismantling protection
    Operating temperature -5 … 45 °C
    • low intrinsic energy requirement
    Application, usage Motion detector, KNX radio- sensors
    Main design line Berker Q.1/Q.3
    Secondary design line(s) Berker.Net, Berker Q.3, Berker Q.1, Motion detector, Electronics platform
    • Continuous direct sunlight penetrating the upward-pointing detection plane can result in failure of the motion detector.
      Only suitable for indoor areas!
  • Manual for 853451xx-853461xx - Radio motion detector comfort 1.1 m - 2.2 m quicklink (EN, 2017-11)
    PDF, 4,1 MB
    Berker.Net - Conventional electronics platform Order Overview for Berker.Net - Conventional electronics platform
    Berker.Net - Conventional electronics platform
    PDF, 1,5 MB
    Berker Q.1 Catalogue Chapter for Berker Q.1
    Berker Q.1
    PDF, 18,1 MB
    KNX Database (from ETS4) for 853451xx-853461xx - KNX radio motion detector comfort quicklink (V101)
    KNXPROD, 14,5 MB
    KNX Database (from ETS3) for 853451xx-853461xx - KNX radio motion detector comfort quicklink (V101)
    VD5, 17,4 MB
    Application description ETS for 853451xx-853461xx - KNX radio motion detector comfort quicklink (EN, vers. 6T8015-51b)
    PDF, 3,1 MB
    Application description ETS for 853451xx-853461xx - KNX radio motion detector comfort quicklink (EN, vers. 6T8015-52b)
    PDF, 3 MB
    Berker Q.1/Q.3 Product Data Sheet for 85345122
    Berker Q.1/Q.3
    PDF, 515 KB
All data is subject to errors and technical modifications.