85875100 Berker.Net - Conventional electronics platform berker.com

85875100

KNX radio switch actuator 1gang/binary input 1gang flush-mounted Electronics platform, white
Product data sheet
Technical Properties
Download
  • KNX radio switch actuator 1gang/binary input 1gang flush-mounted Electronics platform, white
    Art No. 85875100
    EAN No. 4011334376118
    P.U. 1 part
    Price * on demand
    Price Group
    Technical Characteristics
    • ETS additional function: repeater function
    • ETS additional functions: +6 scenes, operating mode on/off, 1 up/down button control, push-button, 2 x alarm, status display
    • reset function (to factory setting)
    • scene saving lockable
    • scene opening via KNX radio appliances
    • quicklink functions: switching, 2 scenes, time switching, NO contact push-button, forced control
    • confectioned, with 2-core cable
    • with manual operation on/off
    • Activation, for example through switch, push-buttons, timer
    • with configuration and function button
    Radio protocol KNX Radio
    Receiver category 2
    • with independent, mains supplied, binary input for potential-free contact
    Input signal current 33 µA
    Radio reception frequency 868,3 MHz
    Radio transmission/reception frequency 868,3 MHz
    Conventional transformers 800 VA
    Electronic transformers 600 W
    Radio transmission power < 10 mW
    Input scanning voltage 5 V
    Relative humidity (without condensation) 0 … 65 % (without condensation)
    Dimensions, sensor (Ø x H) 53 x 30 mm
    Colour independent of design lines white
    Ø 53 mm
    Height 46,6 mm
    - parallel compensated 36 W
    • with transmission status and control LED for On/Off
    • with configuration and function LEDs
    230 V incandescent lamps and halogen lamps 1500 W
    • for installation behind flush-mounted inserts
    • with screw-in lift terminals
    • integration in the KNX radio/TP gateway, surface-mounted, into the KNX TP system
    Binary cable length, extendable to max. 5 m
    Binary cable length ≈ 20 cm
    Supported configuration modes system , easy , PB
    • toolless quicklink configuration using buttons and LED display
    Number of radio channels 1
    Number of quicklink links max. 20 transmitter/receiver
    Transmitter duty cycle 1 %
    Operating temperature 0 … 45 °C
    • low intrinsic energy requirement
    Application, usage KNX radio - actuators
    product family: product family: output
    Main design line Electronics platform
    Secondary design line(s) Berker.Net
  • Manual for 85875100 - KNX radio switch actuator 1gang/binary input 1gang flush-mounted (DE-EN-IT, 2012-05)
    PDF, 174 KB
    Berker.Net - Conventional electronics platform Order Overview for Berker.Net - Conventional electronics platform
    Berker.Net - Conventional electronics platform
    PDF, 2,2 MB
    Berker B.7 Catalogue Chapter for Berker B.7
    Berker B.7
    PDF, 19 MB
    ETS Database for 85875100
    KNXPROD, 12,4 MB
    ETS Database for 85875100
    VD5, 14,9 MB
    KNX Database (from ETS3) for 85875100 - KNX radio switch actuator 1gang/binary input 1gang flush-mounted (V101)
    VD5, 14,9 MB
    KNX Database (from ETS4) for 85875100 - KNX radio switch actuator 1gang/binary input 1gang flush-mounted (V101)
    KNXPROD, 12,4 MB
    Application description ETS for 85865100-85875100 - KNX radio switch actuator 1gang/binary input 1gang (EN, vers. 6T8073-52A)
    PDF, 1,6 MB
    KNX radio switch actuator 1gang/binary input 1gang flush-mounted Electronics platform, white Product Data Sheet for 85875100
    KNX radio switch actuator 1gang/binary input 1gang flush-mounted Electronics platform, white
    PDF, 468 KB
Customers who bought this item also bought (2)
85876200
85876200

KNX radio binary input 2gang flush-mounted 230 V Electronics platform, light grey

85875200
85875200

Radio switch actuator 1gang flush-mounted KNX

* All data is subject to errors and technical modifications. All price values are recommended retail price values, exclusive of VAT.