75316017 Switch actuators RMD berker.com

75316017

Switch actuator 6gang with current measurring RMD with plug-in terminals, KNX, light grey
Product data sheet
Technical Properties
Download
  • Switch actuator 6gang with current measurring RMD with plug-in terminals, KNX, light grey
    Art No. 75316017
    EAN No. 4011334399216
    P.U. 1 part
    Price * on demand
    Price Group
    Technical Characteristics
    Bus system KNX
    Fixing mode REG
    • suitable to switch different external conductors
    • Current detection with output of measured values cyclically or if a change occurs
    • with operating hours meter
    • for switching, e.g. of 6 independent loads
    Indicator lamp yes
    • manual operation can be activated via 2-level selection switch, thereby deactivation of the KNX function
    • status LED integrated in the manual operation button
    • with illuminated programming button
    Rated operational voltage Ue 230 V
    Frequency 50/60 Hz
    Rated current 16 A
    max. switching capacity at 230 V AC
    Operating voltage over bus 21 … 32 V DC
    Output voltage 230 V~
    System supply voltage 30V DC via bus
    Bus current consumption (data transfer) ≈ 6 mA
    Bus current consumption (idle) ≈ 5 mA
    Switching current at cos φ = 0.8 max. 16 A
    Max. power with electronic transfo. 1380 W
    Total power loss under IN 6 W
    Max. switching power 2300 W
    Conventional transformers 1600 VA
    Electronic transformers 1380 W
    Measuring range 0,05 … 16 A
    Measurement tolerance < 2%
    Colour independent of design lines light grey
    Colour light grey
    Depth 65 mm
    Height 90 mm
    Width 105 mm
    Width of rail mounted device (RMD) 6 modules
    - with electronical ballast (EB) 25 x 18 W
    - uncompensated 800 W
    Energy-saving lamps 25 x 18 W
    Power lighting fluo lamps 25x18W
    Max. power fluo. duo lamp comp. series 25x18W
    230 V retrofit LED lamps 200 W
    • Status LED integrated in manual operation button
    230 V incandescent lamps and halogen lamps 2300 W
    230 V halogen lamps 2300 W
    Max. power with incandescent lamps 2300 W
    230 V incandescent lamps 2300 W
    Connection cross-sect. flexible cable 0,75 / 2,5mm²
    Connection cross-sect. rigid cable 0,75 / 2.5mm²
    Conductor cross-section (flexible) 0,75 … 2,5 mm²
    Conductor cross-section (rigid) 0,75 … 2,5 mm²
    type of connection quick connect
    Different phases connectablly yes
    Type of contacts 6NO
    • with integral bus coupling unit
    • with plug-in terminals
    • bus connection via connecting terminal
    Supported configuration modes system
    Modular expandability no
    Modular expandability no
    • with potential-free NO contacts as well as NC contact parameterisable
    Protection index IP IP20
    Operating temperature -5 … 45 °C
    Storage temperature -20 to 70 °C
    Storage/transport temperature -20 … 70 °C
    Main design line KNX
  • Module 6 sorties avec mesure de courant 75316017
    PDF, 843 KB
    Manual for 75316017 - Switch actuator 6gang RMD with current detection (DE-EN-NL-FR-ES-IT, 2013-03)
    PDF, 843 KB
    Switch actuators RMD Order Overview for Switch actuators RMD
    Switch actuators RMD
    PDF, 459 KB
    Berker KNX - system Catalogue Chapter for Berker KNX - system
    Berker KNX - system
    PDF, 7,6 MB
    Logiciel d'application ETS du 75316017
    KNXPROD, 452 KB
    Logiciel d'application ETS du 75316017
    VD5, 641 KB
    Application description ETS for 75316017 - Switch actuator 6gang with current measurring RMD (EN, vers. 6T8099-52A)
    PDF, 2,5 MB
    Switch actuator 6gang with current measurring RMD with plug-in terminals, KNX, light grey Product Data Sheet for 75316017
    Switch actuator 6gang with current measurring RMD with plug-in terminals, KNX, light grey
    PDF, 572 KB
* All data is subject to errors and technical modifications. All price values are recommended retail price values, exclusive of VAT.