85875120

Electronics platform
Product data sheet
Technical Properties
Download
  • Electronics platform
    Art No. 85875120
    EAN No. 4011334418641
    P.U. 1 part
    Price * on demand
    Price Group
    Technical Characteristics
    Number of outputs 1
    Bus system yes
    • ETS additional functions: +6 scenes, operating mode on/off, 1 up/down button control, push-button, 2 x alarm, status display
    • reset function (to factory setting)
    • scene saving lockable
    • scene opening via KNX radio appliances
    • quicklink functions: switching, 2 scenes, time switching, NO contact push-button, forced control
    • confectioned, with 2-core cable
    Indicator lamp yes
    • with manual operation on/off
    • Activation, for example through switch, push-buttons, timer
    • with configuration and function button
    Radio protocol KNX Radio
    Receiver category 2
    • with independent, mains supplied, binary input for potential-free contact
    System supply voltage 230V AC
    Number of entry circuits 2
    Input signal current 33 µA
    Withstand current in AC1 for the contact path or zone 1 0,85 A
    Transmission frequency 868 MHz
    Radio reception frequency 868,3 MHz
    Radio transmission/reception frequency 868,3 MHz
    Electronic transformers 600 W
    Radio transmission power < 10 mW
    Input scanning voltage 5 V
    Relative humidity (without condensation) 0 … 65 % (without condensation)
    Dimensions, sensor (Ø x H) 53 x 30 mm
    Colour independent of design lines light grey
    Ø 53 mm
    Height 30 mm
    Height of installed product 40 mm
    Dimensions (LLxwwxhh) 40x40x18
    - parallel compensated 36 W
    Max number of LED/CFL lamps 10
    Lighting power LED lamps 70 W
    • with transmission status and control LED for On/Off
    • with configuration and function LEDs
    230 V incandescent lamps and halogen lamps 1500 W
    Max. power with incandescent lamps 200 W
    • for installation behind flush-mounted inserts
    Connection cross-sect. flexible cable 0,5 / 1,5mm²
    Connection cross-sect. rigid cable 0,5 / 1,5mm²
    type of connection with screw
    Different phases connectablly no
    Type of contacts semi-conductor
    Adapted to the capacitive loads no
    • with screw-in lift terminals
    • integration in the KNX radio/TP gateway, surface-mounted, into the KNX TP system
    Binary cable length, extendable to max. 5 m
    Binary cable length ≈ 20 cm
    Supported configuration modes system , easy , PB
    • toolless quicklink configuration using buttons and LED display
    Number of radio channels 1
    Number of quicklink links max. 20 transmitter/receiver
    Modular expandability no
    Override Yes
    Transmitter duty cycle 1 %
    Operating temperature -5 … 45 °C
    Storage temperature -25 to 70 °C
    • low intrinsic energy requirement
    Application, usage KNX radio - actuators
    product family: product family: output
    Device family TRM
    Main design line Electronics platform
    Secondary design line(s) Berker.Net
  • Instruction manuals for 85875120
    PDF, 860 KB
    Installation manuals for 85875120
    PDF, 24,5 MB
    Actuators flush-mounted/surface-mounted Order Overview for Actuators flush-mounted/surface-mounted
    Actuators flush-mounted/surface-mounted
    PDF, 487 KB
    Berker KNX - system Catalogue Chapter for Berker KNX - system
    Berker KNX - system
    PDF, 7,6 MB
    ETS Database for 85875120
    KNXPROD, 519 KB
    Electronics platform Product Data Sheet for 85875120
    Electronics platform
    PDF, 395 KB
Customers who bought this item also bought (3)
85876100
85876100

KNX radio binary input 2gang flush-mounted Electronics platform, light grey

85875100
85875100

KNX radio switch actuator 1gang/binary input 1gang flush-mounted Electronics platform, white

85875121
85875121

Electronics platform

* All data is subject to errors and technical modifications. All price values are recommended retail price values, exclusive of VAT.