85875120

KNX radio switch actuator 1gang/binary input 2gang flush-mounted, 230 V, 4 A (2-wire) Electronics platform
Product data sheet
Technical Properties
Download
  • KNX radio switch actuator 1gang/binary input 2gang flush-mounted, 230 V, 4 A (2-wire) Electronics platform
    Art No. 85875120
    EAN No. 4011334418641
    P.U. 1 part
    Price * on demand
    Price Group
    Technical Characteristics
    Number of outputs 1
    Bus system yes
    • ETS additional functions: +6 scenes, operating mode on/off, 1 up/down button control, push-button, 2 x alarm, status display
    • reset function (to factory setting)
    • scene saving lockable
    • scene opening via KNX radio appliances
    • quicklink functions: switching, 2 scenes, time switching, NO contact push-button, forced control
    • confectioned, with 2-core cable
    Indicator lamp yes
    • with manual operation on/off
    • with configuration and function button
    • Activation, for example through switch, push-buttons, timer
    Radio protocol KNX Radio
    Receiver category 2
    • with independent, mains supplied, binary input for potential-free contact
    System supply voltage 230V AC
    Input signal current 33 µA
    Number of entry circuits 2
    Withstand current in AC1 for the contact path or zone 1 0,85 A
    Transmission frequency 868 MHz
    Radio reception frequency 868,3 MHz
    Radio transmission/reception frequency 868,3 MHz
    Conventional transformers 10 … 175 VA
    Electronic transformers 10 … 175 W
    Radio transmission power < 10 mW
    • low intrinsic energy requirement
    Input scanning voltage 5 V
    Relative humidity (without condensation) 0 … 65 % (without condensation)
    Dimensions, sensor (Ø x H) 53 x 30 mm
    Colour independent of design lines light grey
    Ø 53 mm
    Height of installed product 40 mm
    Height 30 mm
    Dimensions (LLxwwxhh) 40x40x18
    - parallel compensated 36 W
    Max number of LED/CFL lamps 10
    Lighting power LED lamps 70 W
    • with transmission status and control LED for On/Off
    • with configuration and function LEDs
    230 V incandescent lamps and halogen lamps 10 … 200 W
    Max. power with incandescent lamps 200 W
    • for installation behind flush-mounted inserts
    Connection cross-sect. rigid cable 0,5 / 1,5mm²
    Connection cross-sect. flexible cable 0,5 / 1,5mm²
    type of connection with screw
    Different phases connectablly no
    Type of contacts semi-conductor
    Adapted to the capacitive loads no
    • with screw-in lift terminals
    • integration in the KNX radio/TP gateway, surface-mounted, into the KNX TP system
    Binary cable length, extendable to max. 5 m
    Binary cable length ≈ 20 cm
    Supported configuration modes system , easy , PB
    • toolless quicklink configuration using buttons and LED display
    Number of radio channels 1
    Number of quicklink links max. 20 transmitter/receiver
    Override Yes
    Modular expandability no
    Transmitter duty cycle 1 %
    Operating temperature -5 … 45 °C
    Storage temperature -25 to 70 °C
    Application, usage KNX radio - actuators
    product family: product family: output
    Device family TRM
    Main design line Electronics platform
    Secondary design line(s) Berker.Net
  • Installation manuals for 85875120
    PDF, 24,5 MB
    Actuators flush-mounted/surface-mounted Order Overview for Actuators flush-mounted/surface-mounted
    Actuators flush-mounted/surface-mounted
    PDF, 488 KB
    Berker KNX - system Catalogue Chapter for Berker KNX - system
    Berker KNX - system
    PDF, 7,7 MB
    ETS Database for 85875120
    KNXPROD, 519 KB
    KNX radio switch actuator 1gang/binary input 2gang flush-mounted, 230 V, 4 A (2-wire) Electronics platform Product Data Sheet for 85875120
    KNX radio switch actuator 1gang/binary input 2gang flush-mounted, 230 V, 4 A (2-wire) Electronics platform
    PDF, 395 KB
Customers who bought this item also bought (13)
85875200
85875200

Radio switch actuator 1gang flush-mounted KNX

85876200
85876200

KNX radio binary input 2gang flush-mounted 230 V Electronics platform, light grey

85876100
85876100

KNX radio binary input 2gang flush-mounted Electronics platform, light grey

85875122
85875122

KNX radio switch actuator 1gang/binary input 2gang flush-mounted, 12...230 V AC, 12...24 V DC Electronics platform

85875110
85875110

KNX radio push-button actuator flush-mounted KNX

85121200
85121200

Relay insert Electronics platform

85876210
85876210

KNX radio binary input 2gang flush-mounted

85875121
85875121

KNX radio switch actuator 1gang/binary input 2gang flush-mounted, 230 V, 3 A (3-wire) Electronics platform

85875100
85875100

KNX radio switch actuator 1gang/binary input 1gang flush-mounted Electronics platform, white

85605100
85605100

KNX radio hand-held transmitter 2-channel with labelling field, Electronics platform, polar white/grey, glossy/matt

85121100
85121100

Switch insert 1gang Electronics platform

85020100
85020100

Power supply for KNX radio application module Electronics platform

85165100
85165100

KNX radio switch actuator 1gang surface-mounted Electronics platform, white

* All data is subject to errors and technical modifications. All price values are recommended retail price values, exclusive of VAT.