Electronics platform, ligth grey
Product data sheet
Technical Properties
  • Electronics platform, ligth grey
    Art No. 85275120
    EAN No. 4011334418610
    P.U. 1 part
    Price * on demand
    Price Group
    Technical Characteristics
    Bus system yes
    Number of blinds/shutters outputs 1
    Bus module detachable no
    • ETS additional functions: +6 scenes, operating mode, 1 up/down button control, 2 x alarm, status display
    • ETS additional function: repeater function
    • reset function (to factory setting)
    • scene saving lockable
    • scene opening via KNX radio appliances
    • quicklink functions: blind, 2 scenes, forced control, up/down push-button
    • with 2 mechanically and electrically mutually-locked relay contacts
    Indicator lamp yes
    • with manual operation up/down
    • Activation, for example through switch, push-button, timer, blind timer switch
    • with configuration and function button
    Radio protocol KNX Radio
    Receiver category 2
    • with 2 independent, mains supplied, binary inputs for potential-free contacts
    Type of supply voltage AC
    System supply voltage 230V AC
    Number of entry circuits 2
    Maximum switching current 3 A
    Radio reception frequency 868,3 MHz
    Radio transmission/reception frequency 868,3 MHz
    Contact rating with 230 V in AC1 690 W
    Total power loss under IN 450 mW
    Radio transmission power < 10 mW
    Relative humidity (without condensation) 0 … 65 % (without condensation)
    Ø 53 mm
    Height 27 mm
    Dimensions (Ø x H) 53 x 27 mm
    • with configuration and function LEDs
    • with control LED (relay closed)
    • for installation behind flush-mounted inserts
    Connection cross-sect. flexible cable 0,5 / 1,5mm²
    Connection cross-sect. rigid cable 0,5 / 1,5mm²
    Conductor cross-section 0,75 … 2,5 mm²
    type of connection with screw
    Number of contacts 1
    • with 2 independent battery-supplied binary inputs for potential-free contacts
    • with screw-in lift terminals
    • integration in the KNX radio/TP gateway, surface-mounted, into the KNX TP system
    Binary cable length, extendable to max. 5 m
    Supported configuration modes system , easy , PB
    Lamella adjustment on signal duration < 1 s
    • toolless quicklink configuration using buttons and LED display
    Number of radio channels 2
    Number of quicklink links max. 20 transmitter/receiver
    Override Yes
    Self-retaining for 2 min on signal length > 1 s
    Transmitter duty cycle 1 %
    Change-over time for change of direction < 0,6 s
    Storage temperature -20 to 70 °C
    • low intrinsic energy requirement
    Application, usage KNX radio - actuators
    product family: product family: output
    Device family TRM
    Main design line Electronics platform
    Secondary design line(s) Berker.Net
  • Instruction manuals for 85275120
    PDF, 1002 KB
    Installation manuals for 85275120
    PDF, 24,5 MB
    Actuators flush-mounted/surface-mounted Order Overview for Actuators flush-mounted/surface-mounted
    Actuators flush-mounted/surface-mounted
    PDF, 487 KB
    Berker KNX - system Catalogue Chapter for Berker KNX - system
    Berker KNX - system
    PDF, 7,6 MB
    ETS Database for 85275120
    KNXPROD, 547 KB
    Electronics platform, ligth grey Product Data Sheet for 85275120
    Electronics platform, ligth grey
    PDF, 390 KB
Customers who bought this item also bought (3)

KNX radio/TP gateway surface-mounted with integral bus coupling unit, Electronics platform, polar white matt


Switch actuator/blind actuator 2/1gang pro + binary input 2gang flush-mounted 6 A with screw terminals, KNX, ligth grey


KNX radio blind actuator 1gang/binary input 2gang flush-mounted Electronics platform, light grey

* All data is subject to errors and technical modifications. All price values are recommended retail price values, exclusive of VAT.