KNX radio blind actuator 1gang/binary input 2gang flush-mounted Electronics platform, light grey

85275100 KNX radio blind actuator 1gang/binary input 2gang flush-mounted Electronics platform,  light grey
Art No. 85275100
EAN No. 4011334376125
P.U. 1 PART
  • Technical Properties

    Operating voltage 230 V AC
    Frequency 50 Hz
    Input scanning voltage per channel 5 V
    Radio transmission/reception frequency 868,3 MHz
    Radio protocol KNX Radio
    Transmitter duty cycle 1 %
    Receiver category 2
    Number of radio channels 2
    Number of quicklink links max. 20 transmitter/receiver
    Radio transmission power < 10 mW
    Radio transmission range (free field) max. 100 m
    Radio transmission range (building) max. 30 m
    Lamella adjustment on signal duration < 1 s
    Change-over time for change of direction < 0,6 s
    Operating temperature 0/45 °C
    Conductor cross-section 0,75/2,5 mm²
    Binary cable length ≈ 20 cm
    Binary cable length, extendable to max. 5 m
    Dimensions (Ø x H) 53/27 mm
      light grey
    Energy-saving low intrinsic energy requirement
    Function reset function (to factory setting)
    quicklink functions quicklink functions: blind, 2 scenes, forced control, up/down push-button
    Bus connection integration in the KNX radio/TP gateway, surface-mounted, into the KNX TP system
    ETS additional functions ETS additional functions: +6 scenes, operating mode, 1 up/down button control, 2 x alarm, status display ; ETS additional function: repeater function
    LED with configuration and function LEDs ; with control LED (relay closed)
    Button / push-button with configuration and function button
    Operation with manual operation up/down
    Light scenes scene saving lockable ; scene opening via KNX radio appliances
    Programming toolless quicklink configuration using buttons and LED display
    Switch mode with 2 mechanically and electrically mutually-locked relay contacts
    inputs with 2 independent, mains supplied, binary inputs for potential-free contacts
    Control Activation, for example through switch, push-button, timer, blind timer switch
    Installation mode for installation behind flush-mounted inserts
    Connection with 2 independent battery-supplied binary inputs for potential-free contacts
    Type of connection with screw-in lift terminals
  • Download

    • Manuals & installation instructions

      Manual for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (DE-EN-IT, 2012-05)
    • Catalogue - Pages

      Blind actuators Order Overview for Blind actuators
      Blind actuators
    • Catalogue - Chapters

      Berker KNX - quicklink Catalogue Chapter for Berker KNX - quicklink
      Berker KNX - quicklink
    • KNX product database

      ETS Database for 85275100
      KNX Database (from ETS4) for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (V101)
      KNX Database (from ETS3) for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (V101)
    • Application guides ETS

      Application description ETS for 85275100 - KNX radio blind actuator 1gang/binary input 2gang flush-mounted (EN, vers. 6T8075-52A)
    • Product data sheets

      KNX radio blind actuator 1gang/binary input 2gang flush-mounted Electronics platform, light grey Product Data Sheet for 85275100
      KNX radio blind actuator 1gang/binary input 2gang flush-mounted Electronics platform, light grey
All data is subject to errors and technical modifications.