KNX radio switch actuator 1gang/binary input 1gang flush-mounted Electronics platform, white

85875100 KNX radio switch actuator 1gang/binary input 1gang flush-mounted Electronics platform,  white
Art No. 85875100
EAN No. 4011334376118
P.U. 1 PART
  • Technical Properties

    Operating voltage 230 V AC
    Frequency 50 Hz
    Input scanning voltage 5 V
    230 V incandescent lamps and halogen lamps 1500 W
    - parallel compensated 36 W
    Conventional transformers 800 VA
    Electronic transformers 600 W
    Radio transmission/reception frequency 868,3 MHz
    Radio protocol KNX Radio
    Transmitter duty cycle 1 %
    Receiver category 2
    Number of radio channels 1
    Number of quicklink links max. 20 transmitter/receiver
    Radio transmission power < 10 mW
    Radio transmission range (free field) max. 100 m
    Radio transmission range (building) max. 30 m
    Operating temperature 0 … 45 °C
    Binary cable length ≈ 20 cm
    Binary cable length, extendable to max. 5 m
    Dimensions, sensor (Ø x H) 53 x 30 mm
    Energy-saving low intrinsic energy requirement
    Function reset function (to factory setting)
    quicklink functions quicklink functions: switching, 2 scenes, time switching, NO contact push-button, forced control
    Bus connection integration in the KNX radio/TP gateway, surface-mounted, into the KNX TP system
    ETS additional functions ETS additional function: repeater function ; ETS additional functions: +6 scenes, operating mode on/off, 1 up/down button control, push-button, 2 x alarm, status display
    LED with transmission status and control LED for On/Off ; with configuration and function LEDs
    Button / push-button with configuration and function button
    Operation with manual operation on/off
    Light scenes scene saving lockable ; scene opening via KNX radio appliances
    Programming toolless quicklink configuration using buttons and LED display
    inputs with independent, mains supplied, binary input for potential-free contact
    Control Activation, for example through switch, push-buttons, timer
    Pre-assembled confectioned, with 2-core cable
    Installation mode for installation behind flush-mounted inserts
      white
    Type of connection with screw-in lift terminals
  • Download

    • Manuals & installation instructions

      Manual for 85875100 - KNX radio switch actuator 1gang/binary input 1gang flush-mounted (DE-EN-IT, 2012-05)
    • Catalogue - Pages

      Binary inputs and switch actuators Order Overview for Binary inputs and switch actuators
      Binary inputs and switch actuators
    • Catalogue - Chapters

      Berker KNX - quicklink Catalogue Chapter for Berker KNX - quicklink
      Berker KNX - quicklink
    • KNX product database

      KNX Database (from ETS4) for 85875100 - KNX radio switch actuator 1gang/binary input 1gang flush-mounted (V101)
      KNX Database (from ETS3) for 85875100 - KNX radio switch actuator 1gang/binary input 1gang flush-mounted (V101)
      ETS Database for 85875100
    • Application guides ETS

      Application description ETS for 85865100-85875100 - KNX radio switch actuator 1gang/binary input 1gang (EN, vers. 6T8073-52A)
    • Product data sheets

      KNX radio switch actuator 1gang/binary input 1gang flush-mounted Electronics platform, white Product Data Sheet for 85875100
      KNX radio switch actuator 1gang/binary input 1gang flush-mounted Electronics platform, white
All data is subject to errors and technical modifications.